Page 2 of 2
Re: Cam cover gasket woes
Posted: Thu Oct 15, 2015 2:17 pm
by mark1gls
ghost123uk wrote:Blimey Mr mark1gls, that one was bad, and still looks a bit mucky afterwards.
That was how I found it when I took the rocker cover off a Mk2 Golf which I had just bought, never seem one that bad. The 2 pictures are before I did anything as I forgot to take a picture of it when I finished.
Picture of one I've just finished doing.
Re: Cam cover gasket woes
Posted: Fri Oct 16, 2015 7:13 pm
by james butler
cool i will give that a go and report back my findings.
Re: Cam cover gasket woes
Posted: Wed Oct 28, 2015 9:27 pm
by Red Rocco
New rubber gasket fitted a month ago, seems oil tight now. I have a K&N filter so the breather pipe is deleted and replaced by a breather filter. It does seem to spray an oil mist around that area so I'll fit a catch tank. The mesh inside the cover is pretty clean after I left it to soak with gunk followed by loads of WD40
