Re: please help.. bleeding new brake setup!
Posted: Thu Aug 14, 2014 9:13 pm
Well I removed the regulators as Tim_R suggested, I figure the fronts are 256's now so the rears aren't going to be locking before they do! Didn't resolve anything but was good to take them out of the equation.
I finally managed to get some braking though!! It's nowhere near as it should be but it's progress.. I bench bled the master cylinder and now we're getting some stoppage! The pedal will still go to the floor but at least I have some braking. Next I will bleed the MC in the car and do a long pressure bleed and see what we've got. I'll tell you something though, I'm not getting brakes fast but I'm learning about them fast which is positive!
I finally managed to get some braking though!! It's nowhere near as it should be but it's progress.. I bench bled the master cylinder and now we're getting some stoppage! The pedal will still go to the floor but at least I have some braking. Next I will bleed the MC in the car and do a long pressure bleed and see what we've got. I'll tell you something though, I'm not getting brakes fast but I'm learning about them fast which is positive!