Injector issue/query

seanr68 · Post by **seanr68** » Fri Sep 28, 2012 6:48 pm

Today i was attempting to swap my injectors from my late(1991)DX engine into my rebuilt TSR motor, when i came across a problem. The later injectors wont fit into the earlier seats, so i removed the caps from the end of the later type injectors and refitted them into the early seats. Is this arrangement ok? Or can it cause issues?

I now have the lower of the two arrangements pictured. Is that ok?

markh · Post by **markh** » Wed Oct 10, 2012 8:50 am

I did this on one of my GTXs a while back and had no issues bud.

chopperoli · Post by **chopperoli** » Wed Oct 10, 2012 1:13 pm

Read somewhere that injectors are matched to the accumulator due to injector opening pressures (eg early injector = early accumulator and vice versa)

seanr68 · Post by **seanr68** » Thu Oct 11, 2012 9:12 pm

Cheers gents.
Been running it now for over a week with no issues, but i did keep my original injectors, just removed the cap from the end.

Scirocco Register

Scirocco Register

Injector issue/query

Injector issue/query

Re: Injector issue/query

Re: Injector issue/query

Re: Injector issue/query