How should a front
Bumper mount onto the panel i found that mine is held with screws is thos
Right?
Front bumper
Forum rules
Hints, tips and guides for repair and modification - the FAQ section on the main website is worth checking first for information relating to common faults and technical help. Useful posts and guides will be added to the FAQ http://www.sciroccoregister.co.uk/scirocco-faq
Hints, tips and guides for repair and modification - the FAQ section on the main website is worth checking first for information relating to common faults and technical help. Useful posts and guides will be added to the FAQ http://www.sciroccoregister.co.uk/scirocco-faq
-
- Posts: 25
- Joined: Sun Jun 27, 2010 10:36 am
- fill in the right answer: 10
- Location: Doncaster.
Re: Front bumper
Do you mean how does the bumper skin attach to the iron behind it? If so, it's held in place with a series of clips.
If however you mean how does the whole bumper attach to the chassis, it's held on by four bolts - two on each bracket. The bolts are accessible via the top of the engine bay.
Shouldn't be held on with screws in either case.
If however you mean how does the whole bumper attach to the chassis, it's held on by four bolts - two on each bracket. The bolts are accessible via the top of the engine bay.
Shouldn't be held on with screws in either case.
'89 Scala 1.8i - Daily drive, Work in progress!