Forum Update: This forum is now a legacy platform with limited activity. We recommend joining our Facebook group for the latest discussions and updates. The forum will remain online and usable but it's classed as an archive.
Users are NOT sync'd between the website and the forum. This means you MUST create an account for both.
Users are NOT sync'd between the website and the forum. This means you MUST create an account for both.
any 1 live neer falkirk
Forum rules
Hints, tips and guides for repair and modification - the FAQ section on the main website is worth checking first for information relating to common faults and technical help. Useful posts and guides will be added to the FAQ http://www.sciroccoregister.co.uk/scirocco-faq
Hints, tips and guides for repair and modification - the FAQ section on the main website is worth checking first for information relating to common faults and technical help. Useful posts and guides will be added to the FAQ http://www.sciroccoregister.co.uk/scirocco-faq
any 1 live neer falkirk
hay i need help putting a mk2 gti flywheel on and a new clutch i dont have a 3/8 torque wrench but ive got a 1/2inch on but no step down, ive a haynes manuel for the info problem is i dont know where the timing marks are cheers kev ps i will pay 4 petrol msg me
-
Risocco
- Posts: 1374
- Joined: Wed Apr 01, 2009 1:09 am
- fill in the right answer: 10
- Location: Costa-Del-Kidderminster
Re: any 1 live neer falkirk
Not sure I've got this right, but do you mean to say that your torque wrench is 1/2 but sockets are 3/8s? If so you can buy a reducer from Halfords for a couple of quid. Don't get a cheaper one as they sheer off.
Also, the timing mark on the flywheel will line up fine due to the dowels on the flywheel itself, it can only fit snug one way dude.
Apologies if I've got the wrong end of the stick there.
Also, the timing mark on the flywheel will line up fine due to the dowels on the flywheel itself, it can only fit snug one way dude.
Apologies if I've got the wrong end of the stick there.
1983 GL
1986 GT
1994 Corrado VR6
1986 GT
1994 Corrado VR6
Re: any 1 live neer falkirk
with my flywheel it seems u can put it on a choise of 3 ways u can marry it up to the bolt patterns with no problems from any dowels. cheers kev
Last edited by gplategt on Sun Sep 11, 2011 3:27 pm, edited 1 time in total.
Re: any 1 live neer falkirk
Risocco wrote:Not sure I've got this right, but do you mean to say that your torque wrench is 1/2 but sockets are 3/8s? If so you can buy a reducer from Halfords for a couple of quid. Don't get a cheaper one as they sheer off.
Also, the timing mark on the flywheel will line up fine due to the dowels on the flywheel itself, it can only fit snug one way dude.
Apologies if I've got the wrong end of the stick there.
and bud u got it right lol that is the problem but i dont have a reducer ither