mk2 filler neck

mk2moo · Post by **mk2moo** » Fri Jun 17, 2011 11:05 am

Hey, ive got a project going on at the min and as usual the fuel filler neck is rotten. Where do people get there fuel necks from as ive been searching for the past few weeks with now avail.

Cheers,
Liam

richlyons · Post by **richlyons** » Fri Jun 17, 2011 11:44 am

i think ive herd gsf or ecp do them, also herd that you can use a mk1 golf one with a bit of trimming?

Post by **the edmundator** » Fri Jun 17, 2011 6:49 pm

Yes, you can cut a mk1 Golf filler neck down do size and make it fit ok.

Post by **ianaudia4** » Fri Jun 17, 2011 6:58 pm

If you are struggling to find one let me know as I have a Golf one (brand new) that I was storing just in case!

mk2moo · Post by **mk2moo** » Fri Jun 17, 2011 8:52 pm

Ahh thats good then. How much for the golf one? Pm me over a price :).

Cheers

Village Idiots · Post by **Village Idiots** » Sat Jun 18, 2011 8:50 am

I recently fitted a new neck to my Scala. GSF had the parts: Mk1 Golf neck and rubber pipe to connect to tank.

I did a detailed post of how to fit in the fueling section.

Post by **GTXTRA** » Sat Jun 18, 2011 10:46 am

Also e36 BMW 3 series ones can be made to fit with a bit of heating up, mark h did this on one of his project cars - advantage = they're plastic if you cant track down a new one or a stainless steel one.

mazellann · Post by **mazellann** » Sat Jun 18, 2011 3:57 pm

Are there different types of mk1 golf filler neck, the one i bought couldn't be made to fit, the top part of it was totally different to a scirocco one?

Post by **the edmundator** » Sat Jun 18, 2011 6:56 pm

I think the cabriolet has a different filler neck to the hatch. But either way, the cap end is still different and you can't re-use your original cap.

Village Idiots · Post by **Village Idiots** » Sun Jun 19, 2011 9:51 am

Check my post in fueling section. You can re-use your filler cap by a bit of careful cutting and welding.

steve GT VW · Post by **steve GT VW** » Thu Aug 04, 2011 5:58 pm

hi all

I have this issue too although its not so urgent as I have LPG, was wondering if anyone had tried to fit and internal rubber or plastic sleeve to the neck instead of have all the issues with replacing the neck its self?
I dont need to use very often and only put 1 gallon in a year, so do you think it would be possible???

let me know your thoughts

Steve

Nate · Post by **Nate** » Fri Aug 05, 2011 2:36 pm

if it's just pin-holed, trat it with POR15 tank sealer. should do the trick nicely

steve GT VW · Post by **steve GT VW** » Wed Oct 19, 2011 6:12 pm

just put the car back together, Tank sealer did the trick, took 4 days to dry, but was fairly quick to do

Cheers

Steve

Scirocco Register

Scirocco Register

mk2 filler neck

mk2 filler neck

Re: some help

Re: some help

Re: some help

Re: some help

Re: some help

Re: some help

Re: mk2 filler neck

Re: mk2 filler neck

Re: mk2 filler neck

Re: mk2 filler neck

Re: mk2 filler neck

Re: mk2 filler neck