oil pump question

For all Carb and Injection engines, standard or modified plus non-standard engine transplants. Heads; Blocks; Cooling (including heater issues related to the cooling system); Mounts etc
Forum rules
Hints, tips and guides for repair and modification - the FAQ section on the main website is worth checking first for information relating to common faults and technical help. Useful posts and guides will be added to the FAQ http://www.sciroccoregister.co.uk/scirocco-faq
Post Reply
johnsm
Posts: 15
Joined: Sun Mar 28, 2010 3:26 pm

oil pump question

Post by johnsm »

is the oil pump in the 1800 carb ex model the same as the 1800 inj dx model,the gears in the oil pump of my storm dx are chipped and i have low oil pressure ,i have a good oil pump out of a1800 carb ex ,a 1989 model and i was going to fit this into my storm,both pumps are identical except thr gears in the oil pump in the ex are longer by about 4 mm,will this make any difference,any help and advice will be appreciated.


User avatar
Funky Diver
Posts: 1175
Joined: Fri Apr 17, 2009 10:26 pm
fill in the right answer: 10
Location: Darlington
Contact:

Re: oil pump question

Post by Funky Diver »

In short yes... you should be able to change the intermediate shaft gear wheel over, but they should be the same, presuming it's coming off a similar year car.


vr_powered
Posts: 142
Joined: Mon May 10, 2010 2:00 pm

Re: oil pump question

Post by vr_powered »

Storm may well be solid lifter i really cant remember 100%, post 1985 was hydraulic lifter and afaik the oil pumps where different depending on solid or hydraulic


vr_powered
Posts: 142
Joined: Mon May 10, 2010 2:00 pm

Re: oil pump question

Post by vr_powered »

vw parts catalogue shows one pump listed throughout so they are the same no difference between hydraulic or solid lifter, dx same as ex etc


Post Reply