New install

In car entertainment: stereo; speakers; portable devices etc
Post Reply
User avatar
fonzooorooo
Posts: 429
Joined: Sun May 17, 2009 9:23 am
fill in the right answer: 10
Location: NW Leics
Contact:

Re: New install

Post by fonzooorooo »

Jay4424 wrote:
Beddo88 wrote:
...oh, and foonzoo, you rally think mine have better bass? ...w must compare, just fonts, on a flat eq, same tune. ...be amazed if it us as my craftsman shi is nothing compared to yours, so yours will have been fitted better, and so have less phase cancelation! ...but cheers anyway :-)
Jay.
I'd be very disappointed if yours didn't have better bass - larger cone, more modern design (likely to be better suspension) and MUCH dearer kit! - mine were "budget" (albeit pretty good at the price) gear in 1995!


User avatar
Beddo88
Posts: 397
Joined: Sat Oct 24, 2009 4:17 pm

Re: New install

Post by Beddo88 »

I shall give that a shot. Need to get the amp i'm going to power it with first though, no point trying to sort it all out on my home amp, it'll be way underpowered. (only about 80W RMS) per channel. As i said be4... on with the ebya hunting :D UNless anyone on here has a decent 4 channel amp they wanna sell..?


Image
User avatar
Beddo88
Posts: 397
Joined: Sat Oct 24, 2009 4:17 pm

Re: New install

Post by Beddo88 »

Well, yesterday my lovely new amp (ebay) arrived.
Its a Vibe Blackbox 3, 4 channel amp. 4x100RMS or 2x300RMS. or a combination therein. So.. slightly more powerful that my sub, and certainly more than im likely to run through the components. (which im yet to buy). But perfect for what i want, and i'd rather be overpowered than under powered and ruin everything.

Sucks i have to wait until the weekend to get everything sorted though... stupid jobs eh!!


Image
G Beats
Posts: 1067
Joined: Sun Jun 21, 2009 12:19 am
fill in the right answer: 10
Contact:

Re: New install

Post by G Beats »

ok good 4 u' u working getting those wheels sorted i sold u?


G Beats.Been into MK 2 V.W Sciroccos since 98.Now on my fourth MK 2 Scirocco. R.I.P two MK 2 Scala DX Engine's.Sold GT 2. No longer have a mk 2 v.w Scirocco as it was stolen back in February 2020 .Or another one know have a 1980s BMW.
User avatar
Beddo88
Posts: 397
Joined: Sat Oct 24, 2009 4:17 pm

Re: New install

Post by Beddo88 »

Yep they're currently sitting in my room waiting for the money to be thrown at them :P Should have them sorted in time for summer which will be nice, and means i get both shiny new wheels and new rubber all round! :D


Image
User avatar
Junglist
Posts: 555
Joined: Wed Apr 01, 2009 7:06 pm
fill in the right answer: 10
Location: MANCHESTER

Re: New install

Post by Junglist »

How are you fixed for a head unit? Fancy a black with green lighting alpine? 60 watt x 4 (27x4 RMS). Suits the scirocco interior very well. I just bought one I didn't need so I could get the changer it was being sold with. Thought I'd offer you first dibs since you seem to want a decent set up.


Tornado GTII: Koni, Flo-flex, Girling, Weber, K&N, Powerflow, Goodridge, ASA, Yokohama... to fit: stainless 4 branch.
ImageImage
G Beats
Posts: 1067
Joined: Sun Jun 21, 2009 12:19 am
fill in the right answer: 10
Contact:

Re: New install

Post by G Beats »

Beddo88 wrote:Yep they're currently sitting in my room waiting for the money to be thrown at them :P Should have them sorted in time for summer which will be nice, and means i get both shiny new wheels and new rubber all round! :D

ok good 4 u iam very pleased they gone to a fellow rocco diver' sounds very good they will great when they finshed. :beers: :good: :music:


G Beats.Been into MK 2 V.W Sciroccos since 98.Now on my fourth MK 2 Scirocco. R.I.P two MK 2 Scala DX Engine's.Sold GT 2. No longer have a mk 2 v.w Scirocco as it was stolen back in February 2020 .Or another one know have a 1980s BMW.
User avatar
Beddo88
Posts: 397
Joined: Sat Oct 24, 2009 4:17 pm

Re: New install

Post by Beddo88 »

What sort of outputs does it have...? I have a pretty reasonable HU atm, but it only has one RCA output, which is annoying. Mines green too, does look good in the rocco! :)


Image
User avatar
Junglist
Posts: 555
Joined: Wed Apr 01, 2009 7:06 pm
fill in the right answer: 10
Location: MANCHESTER

Re: New install

Post by Junglist »

3 RCA outputs - front, rear and independently controllable sub. Infinitely expandable with 4v preouts and V-Drive bass engine. Do some googling, this is a top notch CD player. It has a few fancy gimmicks too like motorised tilting and swing down face and illumination that dims with your instrument panel dimmer switch. You can add CD changers on too. It also plays MP3 CDs.

Model number is CDA-7893R


Tornado GTII: Koni, Flo-flex, Girling, Weber, K&N, Powerflow, Goodridge, ASA, Yokohama... to fit: stainless 4 branch.
ImageImage
User avatar
Beddo88
Posts: 397
Joined: Sat Oct 24, 2009 4:17 pm

Re: New install

Post by Beddo88 »

Oh thats very tempting... but i'm afraid i'm gunna have to decline. Cant justify another £100 when i've got a headunit that will suffice atm. Gotta get some components for the front yet!! Trying to pay off student debt doesnt help :( Sorry dude, but cheers for offering the dibs :)


Image
User avatar
Junglist
Posts: 555
Joined: Wed Apr 01, 2009 7:06 pm
fill in the right answer: 10
Location: MANCHESTER

Re: New install

Post by Junglist »

Can do half now half later it if you want. I'll trust you for it.


Tornado GTII: Koni, Flo-flex, Girling, Weber, K&N, Powerflow, Goodridge, ASA, Yokohama... to fit: stainless 4 branch.
ImageImage
User avatar
Beddo88
Posts: 397
Joined: Sat Oct 24, 2009 4:17 pm

Re: New install

Post by Beddo88 »

I dont know if anyone will be ale to help, but having bought this amp im having trouble deciding on which components to go for. Its basically a power issue.

The amp is rated at 100W RMS per channel, so likely to be slightly under that i'd guess as its a bit old? The speakers i'm looking at seem to start from anywhere at 25W upwards... Wondering what exactly i should go for? Theres a set of FLI components -->here<-- but im not sure as to the quality etc of them. They are rated at 75W, so would they be fine?

Is overpowering the speakers likely to damage them badly? I can control the gain seperately to the comps and sub, so i guess if i turned the gain down it would balance out after some experimenting?

Sorry for the 20 questions!! Up hill learning curve..


Image
User avatar
Junglist
Posts: 555
Joined: Wed Apr 01, 2009 7:06 pm
fill in the right answer: 10
Location: MANCHESTER

Re: New install

Post by Junglist »

The amp should be higher power than the speakers, never the other way round. Make sure you don't mix RMS up with peak or max wattage. Think FLI are a budget make.


Tornado GTII: Koni, Flo-flex, Girling, Weber, K&N, Powerflow, Goodridge, ASA, Yokohama... to fit: stainless 4 branch.
ImageImage
User avatar
Beddo88
Posts: 397
Joined: Sat Oct 24, 2009 4:17 pm

Re: New install

Post by Beddo88 »

Yea i thoguht they were a bit budget... but decent ones just seem so expensive :(

Think im still gunna have to give that headunit a miss dude, sorry. Can't afford the extra cash atm. And tax coming up next month :(


Image
ianaudia4
Posts: 3800
Joined: Wed Apr 01, 2009 4:35 pm
fill in the right answer: 15
Location: Central London and Essex

Re: New install

Post by ianaudia4 »

I have Alpine 6 x 4 all round in both my cars, they only cost about £35 a pair and rated at 150w max. I was a bit necky and asked for a discount when I bought 2 pairs for the Scala, got a tenner knocked off!


1984 MK2 Havanna brown Storm
1989 MK2 Alpine white Scala injection
2006 Audi A4 3.0TDI quattro (the beast)
Post Reply