Project RED GTX

Scirocco Register members projects
Forum rules
Section for all vehicle and related projects. Please keep responses pertinent to thread.
Post Reply
markh
Posts: 718
Joined: Wed Apr 01, 2009 2:14 pm
fill in the right answer: 15
Location: Newcastle, Staffordshire.

Re: Project RED GTX

Post by markh »

Back to it today, painted the rocker cover and refitted the repainted upper cam cover. Still plenty of cleaning to do under the bonnet.
Image

Painted the washer bottle, and replaced the washer mototr as the old one was knackered.
Image

Other jobs done included, getting the foglights working (the relay was faulty), fitting the clear indies (cheers MikeH ! :beers: ) fitted the eyebrow spoiler ( it will be repainted, either body colour or matt black) set the ignition timing and a few other bits and small jobs.

I went for the Porsche style side indies for a change from the usual oblong ones.
Image

I gave it a quick run round the block to check the brakes, which are great, and to see if any problems show up. It does have a flat spot when accelarating, so i will have to look into that, and theres a bit of play in the steering column, this maybe down to the column bush being worn, or play in the U/J but im not too worried about it.
But otherwise for a car that has stood for over 9 years, things are looking good.
Image

Before finishing up for the day, i Tcut the rest of the bonnet, and painted one of the centre caps from the Sebrings, as they were looking tatty, its not a bad colour match for the wheels, so i will do the rest of them tomorrow.

Image


Don't ask me....it was like that when i got here !
Image
markh
Posts: 718
Joined: Wed Apr 01, 2009 2:14 pm
fill in the right answer: 15
Location: Newcastle, Staffordshire.

Re: Project RED GTX

Post by markh »

Didnt have much time today, so not a massive update. I painted the rest of the Sebring centre caps.
Image

One of the tyres had a slow puncture, so i dropped it off at the local tyre place for a new valve and balance. Then decided i'd make a start on cleaning up the paintwork, so i Tcut and polished the passenger side panels and its come up really well.

Image

Image

Still plenty to do, but it'l have to wait until im off work again next week. :good:


Don't ask me....it was like that when i got here !
Image
DT1
Posts: 709
Joined: Tue Dec 08, 2009 10:07 pm
fill in the right answer: 10
Location: Aberdeenshire

Re: Project RED GTX

Post by DT1 »

Have to take my hat off to you, that's a pretty quick turnaround. :hi:


markh
Posts: 718
Joined: Wed Apr 01, 2009 2:14 pm
fill in the right answer: 15
Location: Newcastle, Staffordshire.

Re: Project RED GTX

Post by markh »

DT1 wrote:Have to take my hat off to you, that's a pretty quick turnaround. :hi:

Thanks Colin. :beers:


Don't ask me....it was like that when i got here !
Image
markh
Posts: 718
Joined: Wed Apr 01, 2009 2:14 pm
fill in the right answer: 15
Location: Newcastle, Staffordshire.

Re: Project RED GTX

Post by markh »

A spare hour today see's the front bumper removed so it can be cleaned up and painted. It also gave me chance to clean the front panel properly.
Image

I removed the trim strip and gave the bumper a clean off with white spirit and masked off the fog lights.

Image

Then gave it several coats of matt black paint. It doesnt look alot different in the photo's, but believe me it is !!!

Image

Image

I also did the front wiper arms in the same paint and removed the rear bumper so that can be painted tomorrow.


Don't ask me....it was like that when i got here !
Image
User avatar
Reverend Frog
Posts: 497
Joined: Wed Apr 01, 2009 12:57 pm
fill in the right answer: 15
Location: Belfast

Re: Project RED GTX

Post by Reverend Frog »

I'm vicariously enjoying cleaning your car up Mark! Looks beaut with that red paint all polished up


Previously owned:
Image
1988 1.6 GT
1989 1.8 GT
1982 1.6 GTI
1993 Corrado VR6
markh
Posts: 718
Joined: Wed Apr 01, 2009 2:14 pm
fill in the right answer: 15
Location: Newcastle, Staffordshire.

Re: Project RED GTX

Post by markh »

Reverend Frog wrote:I'm vicariously enjoying cleaning your car up Mark! Looks beaut with that red paint all polished up

Thanks Rich, but theres still a ton of cleaning and polishing to do yet !!! :training:


Don't ask me....it was like that when i got here !
Image
monzajake
Posts: 744
Joined: Thu Mar 05, 2009 7:13 pm
fill in the right answer: 15
Location: surrey

Re: Project RED GTX

Post by monzajake »

cleeeeeeeeeeeeeeaaaaaaaaaaan

Top job fella
Whens mot booked ?


Image
markh
Posts: 718
Joined: Wed Apr 01, 2009 2:14 pm
fill in the right answer: 15
Location: Newcastle, Staffordshire.

Re: Project RED GTX

Post by markh »

monzajake wrote:cleeeeeeeeeeeeeeaaaaaaaaaaan

Top job fella
Whens mot booked ?
Cheers Jake. I dont think it'l get MOTd until next month now, due to other commitments.


Don't ask me....it was like that when i got here !
Image
User avatar
Cpt Custom
Posts: 761
Joined: Mon Jul 19, 2010 1:46 pm
fill in the right answer: 15
Location: Northallerton

Re: Project RED GTX

Post by Cpt Custom »

For a total noob like me Mark it's inspiring watching how you tackle your projects.

Can't wait to see how it looks when you have it all put together!

:beers:


Image 1987 Alpine White Mk2 GT Lily
markh
Posts: 718
Joined: Wed Apr 01, 2009 2:14 pm
fill in the right answer: 15
Location: Newcastle, Staffordshire.

Re: Project RED GTX

Post by markh »

Cpt Custom wrote:For a total noob like me Mark it's inspiring watching how you tackle your projects.

Can't wait to see how it looks when you have it all put together!

:beers:
Thanks Paul, cant wait to see it finished myself !! :vcool:


Don't ask me....it was like that when i got here !
Image
markh
Posts: 718
Joined: Wed Apr 01, 2009 2:14 pm
fill in the right answer: 15
Location: Newcastle, Staffordshire.

Re: Project RED GTX

Post by markh »

Tried to sort out the flat spot on accelerating, double checked the timing, which was fine and checked for any air leaks. A small adjustment to the mixture screw ( weakened it off) seems to have cracked the problem. Last week i also found some play in the steering column, turns out that at sometime someone had stripped the thread on the ignition barrel housing and the allen bolt wouldnt tighten up and clamp the column securely. So a replacement nut and bolt were used and the problem solved.
While i was working on the column, i decided to fit the later Golf type stalks, they look way better than the standard ones.
Image

Refitted the painted front bumper.
Image

Cleaned up the rear panel while the bumper was off. The badges still need cleaning up and replacing.
Image

Refitted the bumper once the paint was dry.
Image

Fitted chrome indicator bulbs in the clear front indies (bargain £2.95 off ebay for a pair with free postage) and started to Tcut the panels on the drivers side.
Getting there slowly !!! :good:


Don't ask me....it was like that when i got here !
Image
User avatar
Risocco
Posts: 1374
Joined: Wed Apr 01, 2009 1:09 am
fill in the right answer: 10
Location: Costa-Del-Kidderminster

Re: Project RED GTX

Post by Risocco »

Just my 2p mate, have you thought about painting the bumper stripe red? Think that may look good :beers:

Either way, cracking stuff as always dude

Alex


1983 GL
1986 GT
1994 Corrado VR6
User avatar
Reverend Frog
Posts: 497
Joined: Wed Apr 01, 2009 12:57 pm
fill in the right answer: 15
Location: Belfast

Re: Project RED GTX

Post by Reverend Frog »

Risocco wrote:Just my 2p mate, have you thought about painting the bumper stripe red? Think that may look good :beers:

Either way, cracking stuff as always dude

Alex
i did this on my Rocco. it looks amazing


Previously owned:
Image
1988 1.6 GT
1989 1.8 GT
1982 1.6 GTI
1993 Corrado VR6
markh
Posts: 718
Joined: Wed Apr 01, 2009 2:14 pm
fill in the right answer: 15
Location: Newcastle, Staffordshire.

Re: Project RED GTX

Post by markh »

Alex, Rich, i had considered doing that when i paint the eyebrow spoiler, but im undecided on it. :dunno:


Don't ask me....it was like that when i got here !
Image
Post Reply