Reversing lights not working :(
Forum rules
Hints, tips and guides for repair and modification - the FAQ section on the main website is worth checking first for information relating to common faults and technical help. Useful posts and guides will be added to the FAQ http://www.sciroccoregister.co.uk/scirocco-faq
Hints, tips and guides for repair and modification - the FAQ section on the main website is worth checking first for information relating to common faults and technical help. Useful posts and guides will be added to the FAQ http://www.sciroccoregister.co.uk/scirocco-faq
Reversing lights not working :(
Backed on the drive tonight and was told by the other half both reversing lights were'nt working checked the bulbs both seem fine, checked the fuse, again no problems
all i can think is the switch for the gear selector is faulty, so my question is, is this likely and if so where is it and how do i get to it??? Haynes is useless
Cheers
all i can think is the switch for the gear selector is faulty, so my question is, is this likely and if so where is it and how do i get to it??? Haynes is useless
Cheers
-
ianaudia4
- Posts: 3800
- Joined: Wed Apr 01, 2009 4:35 pm
- fill in the right answer: 15
- Location: Central London and Essex
Re: Reversing lights not working :(
The reversing light switch is on top of the gearbox, should have 2 wires going into it. Be fortunate that it isn't the same switch as on an early injection model with gear change meter, these are £35 plus VAT!
1984 MK2 Havanna brown Storm
1989 MK2 Alpine white Scala injection
2006 Audi A4 3.0TDI quattro (the beast)
1989 MK2 Alpine white Scala injection
2006 Audi A4 3.0TDI quattro (the beast)
Re: Reversing lights not working :(
Cheers mate, so its easy to get to then :) will have a look tonight and get the mulit meter out
-
Nate
- Posts: 4045
- Joined: Thu Apr 02, 2009 10:37 pm
- fill in the right answer: 10
- Location: Cirencester / Swindon
-
ianaudia4
- Posts: 3800
- Joined: Wed Apr 01, 2009 4:35 pm
- fill in the right answer: 15
- Location: Central London and Essex
Re: Reversing lights not working :(
On early MK2's (my Storm being one of them!) there is a gear change and fuel economy meter within the clocks. The reversing light switch and this gauge are combined and as I said they are £35 plus VAT from the dealers.
1984 MK2 Havanna brown Storm
1989 MK2 Alpine white Scala injection
2006 Audi A4 3.0TDI quattro (the beast)
1989 MK2 Alpine white Scala injection
2006 Audi A4 3.0TDI quattro (the beast)
-
Nate
- Posts: 4045
- Joined: Thu Apr 02, 2009 10:37 pm
- fill in the right answer: 10
- Location: Cirencester / Swindon
Re: Reversing lights not working :(
i've got one of those fuel economy meters (NOS) in a box on my desk! i thought it just worked on vacuum to give approximate mpg?
-
ianaudia4
- Posts: 3800
- Joined: Wed Apr 01, 2009 4:35 pm
- fill in the right answer: 15
- Location: Central London and Essex
Re: Reversing lights not working :(
It probably does work on vacumn for the mpg but it has an orange light that comes on to tell you when to change up!
1984 MK2 Havanna brown Storm
1989 MK2 Alpine white Scala injection
2006 Audi A4 3.0TDI quattro (the beast)
1989 MK2 Alpine white Scala injection
2006 Audi A4 3.0TDI quattro (the beast)
- james butler
- Posts: 3007
- Joined: Fri Apr 24, 2009 1:54 pm
- fill in the right answer: 10
- Location: birmingham
Re: Reversing lights not working :(
ive got the same problem. the wires going to the multiplug connecter on the switch have been cut and replaced with female spade conecters, these keep rusting up and giving me a bad conection, because if i wiggle the wires the lights come back on. 
I dont mind project cars but I HATE SANDING!!!
- Funky Diver
- Posts: 1175
- Joined: Fri Apr 17, 2009 10:26 pm
- fill in the right answer: 10
- Location: Darlington
- Contact:
Re: Reversing lights not working :(
I might be able to sort you out the multiplug and some heatshrink if you need it? How handy are you with a soldering iron? If not, and you can wait a wee while, I'll pull out the whole loom and you can have that...
- james butler
- Posts: 3007
- Joined: Fri Apr 24, 2009 1:54 pm
- fill in the right answer: 10
- Location: birmingham
Re: Reversing lights not working :(
yes plz that would be fantastic. yeah im ok with the solderin iron, (not fantastic but im up to the job.)Funky Diver wrote:I might be able to sort you out the multiplug and some heatshrink if you need it? How handy are you with a soldering iron? If not, and you can wait a wee while, I'll pull out the whole loom and you can have that...
cheers
james
I dont mind project cars but I HATE SANDING!!!
Re: Reversing lights not working :(
If anyone needs one if got a working switch which includes all the mfa connections.
£15 posted
£15 posted
- dozzum
- Posts: 670
- Joined: Tue May 26, 2009 11:29 pm
- fill in the right answer: 10
- Location: Benson, Oxfordshire
Re: Reversing lights not working :(
The ones for the mpg gear change light are just to stop the light coming on in 5th gear.
- james butler
- Posts: 3007
- Joined: Fri Apr 24, 2009 1:54 pm
- fill in the right answer: 10
- Location: birmingham
Re: Reversing lights not working :(
cheers for the loom funky driver, i got the part yesterday. ive now got working lights
now i wont be hitting my gateposts anymore when reversing onto my drive. 
I dont mind project cars but I HATE SANDING!!!
- Funky Diver
- Posts: 1175
- Joined: Fri Apr 17, 2009 10:26 pm
- fill in the right answer: 10
- Location: Darlington
- Contact:


