Forum Update: This forum is now a legacy platform with limited activity. We recommend joining our Facebook group for the latest discussions and updates. The forum will remain online and usable but it's classed as an archive.

Users are NOT sync'd between the website and the forum. This means you MUST create an account for both.

Anyone here with Wilwood brakes fitted ?

Suspension; Gearbox, Clutch and Driveshafts; Brakes; Steering; Throttle and clutch cable issues
Forum rules
Hints, tips and guides for repair and modification - the FAQ section on the main website is worth checking first for information relating to common faults and technical help. Useful posts and guides will be added to the FAQ http://www.sciroccoregister.co.uk/scirocco-faq
MrD
Posts: 357
Joined: Thu Apr 02, 2009 3:55 pm
fill in the right answer: 10
Location: Cambridgeshire

Anyone here with Wilwood brakes fitted ?

Post by MrD »

Been told by my ins i need to upgrade my brakes,due to my planned engine upgrade.
Have been looking at the corrado / golf 280mm setup on tut bay,but they go for a decent whack .for 2nd hand stuff.
Also checked out A.V.S who i have used in the past for parts,and rate highly,looking at buying new,calipers,carriers,disks and pads,then the brackets from caddy forum.looking at around £250 to £300.
What sort of money are we talking for Wilwood or Brembo brakes,did a googley but couldn`t find owt ,anyone know a supplier any feedback etc on what they are like etc,and if it`s worth it,as an upgrade over new corrado / golf stuff ? Ta
6 point cage,Koni`s,lower front brace,rear brace,goodridge hoses,4,2,1,supersprint back box,k+n,kent gs2h,vernier,skimmed and ported head,alloy fuel tank.catch tank,Short shift ,9A soon.
Image
the edmundator
Posts: 2928
Joined: Wed Apr 01, 2009 7:34 pm
fill in the right answer: 10
Location: BEDFORD
Contact:

Re: Anyone here with Wilwood brakes fitted ?

Post by the edmundator »

Mr Funk has Wilwoods.
Register Member 829
--
1980 (1976) Mk1 Junior Cup Replica
1987 MK2 GTX
MrD
Posts: 357
Joined: Thu Apr 02, 2009 3:55 pm
fill in the right answer: 10
Location: Cambridgeshire

Re: Anyone here with Wilwood brakes fitted ?

Post by MrD »

Thought he might have ! You there Mr Funk ?
6 point cage,Koni`s,lower front brace,rear brace,goodridge hoses,4,2,1,supersprint back box,k+n,kent gs2h,vernier,skimmed and ported head,alloy fuel tank.catch tank,Short shift ,9A soon.
Image
GTXTRA
Posts: 3392
Joined: Mon Mar 02, 2009 9:38 pm
fill in the right answer: 10
Location: London

Re: Anyone here with Wilwood brakes fitted ?

Post by GTXTRA »

worth scanning through club gti too - a far few uprated go not show motors over there.
Serial Rocco-ist.........
Rusty dan
Posts: 460
Joined: Wed Apr 01, 2009 11:00 pm

Re: Anyone here with Wilwood brakes fitted ?

Post by Rusty dan »

i went with the 280mm option.

calipers with carriers cost me £35ish BARGAIN EBAY!!! , gave them to VW and got recon ones for £110
spacer kit to push caliper out £50
discs and pads

Going to be around the £250 mark depending on what discs/pad option you have.
Click below for Rocco build pics
http://s174.photobucket.com/albums/w114 ... occo%20GT/

insanecreations.net
User avatar
Mr Funk
Posts: 2135
Joined: Wed Apr 01, 2009 6:39 pm

Re: Anyone here with Wilwood brakes fitted ?

Post by Mr Funk »

Not cheap but definately well worth it. Nice big four pots and the kit comes with pretty much everything including calipers, carriers, discs, pads etc. Very very responsive but could probobaly benefit from the uprated master cylinder that's still sitting in my garage. There's probobaly easier ways of sourcing the parts but I'm dead happy. Depending on distance/time you're more than welcome to give it a try. If you want costs drop me a pm.
Head of Complaints - Big Pie Cartel
If it sounds like it's naughty, it probably is.
MrD
Posts: 357
Joined: Thu Apr 02, 2009 3:55 pm
fill in the right answer: 10
Location: Cambridgeshire

Re: Anyone here with Wilwood brakes fitted ?

Post by MrD »

I did find some Brembo jobbies,but looking at around £1200,which i personally think is a bit out of my price range,as the car is a toy,and will be a trackday toy eventually !
Will pm you and ask Wilwood prices,Mr Funk,if they are reasonable i will stop trawling e bay.as don`t mind paying a few hundred quid over standard,also want to up the m,c and servo,new m,c only £40 odd.
Did find some audi s2 calipers ,but it says they are for 276mm disks,so assume the 280 corrado disks won`t be any use ?
6 point cage,Koni`s,lower front brace,rear brace,goodridge hoses,4,2,1,supersprint back box,k+n,kent gs2h,vernier,skimmed and ported head,alloy fuel tank.catch tank,Short shift ,9A soon.
Image
MrD
Posts: 357
Joined: Thu Apr 02, 2009 3:55 pm
fill in the right answer: 10
Location: Cambridgeshire

Re: Anyone here with Wilwood brakes fitted ?

Post by MrD »

Got it !!
http://www.rallydesign.co.uk/product_in ... ts_id=4013

Not too expensive really,was expecting to pay around £300 for new oe quality stuff,so for and extra couple of hundred it`s not too bad,they also have dust seals fitted now.Decisions decisions
6 point cage,Koni`s,lower front brace,rear brace,goodridge hoses,4,2,1,supersprint back box,k+n,kent gs2h,vernier,skimmed and ported head,alloy fuel tank.catch tank,Short shift ,9A soon.
Image
User avatar
Mr Funk
Posts: 2135
Joined: Wed Apr 01, 2009 6:39 pm

Re: Anyone here with Wilwood brakes fitted ?

Post by Mr Funk »

That's the kit I got and to be honest I'm incredibly impressed. Very responsive once they're set up and the guys at Rally Design are very friendly (they're just down the road) and knowledgable.
Can't remember which pads which pads I got though, was advised to get one rather than the other as I don't use it for track
Head of Complaints - Big Pie Cartel
If it sounds like it's naughty, it probably is.
User avatar
Brunty
Posts: 244
Joined: Thu Apr 23, 2009 9:36 am
fill in the right answer: 10
Location: Castle Donington
Contact:

Re: Anyone here with Wilwood brakes fitted ?

Post by Brunty »

I've got a Wilwood 280mm Dynalite set up and think that they've got slightly more feel than my 305mm Brembo set up. They are much cheaper too. With race pads they squeal like a stuck pig when braking gently.

I hadn't seen the kits that Rally Design are doing, well worth going that route as you don't have to worry about the mounting brakets. Not heard anything about the Midilite before though and it doesn't seem to appear on the Wilwood website.
Brunty

Image
MrD
Posts: 357
Joined: Thu Apr 02, 2009 3:55 pm
fill in the right answer: 10
Location: Cambridgeshire

Re: Anyone here with Wilwood brakes fitted ?

Post by MrD »

Wicked,so i won`t need to spend the other £45 on the brackets then ! Think i have made up my mind,think i might announce to all my friends,that they can all put some money in the pot,and treat them as a 40th b day present :hugegrin:
6 point cage,Koni`s,lower front brace,rear brace,goodridge hoses,4,2,1,supersprint back box,k+n,kent gs2h,vernier,skimmed and ported head,alloy fuel tank.catch tank,Short shift ,9A soon.
Image
MrD
Posts: 357
Joined: Thu Apr 02, 2009 3:55 pm
fill in the right answer: 10
Location: Cambridgeshire

Re: Anyone here with Wilwood brakes fitted ?

Post by MrD »

Do you have 15 inch wheels Mr Funk ? Just wondering if they will fit inside my new 15`s
6 point cage,Koni`s,lower front brace,rear brace,goodridge hoses,4,2,1,supersprint back box,k+n,kent gs2h,vernier,skimmed and ported head,alloy fuel tank.catch tank,Short shift ,9A soon.
Image
User avatar
Mr Funk
Posts: 2135
Joined: Wed Apr 01, 2009 6:39 pm

Re: Anyone here with Wilwood brakes fitted ?

Post by Mr Funk »

16's. Here's a pic:
Image
Head of Complaints - Big Pie Cartel
If it sounds like it's naughty, it probably is.
MrD
Posts: 357
Joined: Thu Apr 02, 2009 3:55 pm
fill in the right answer: 10
Location: Cambridgeshire

Re: Anyone here with Wilwood brakes fitted ?

Post by MrD »

Oh that looks sexy !!!
Looks like they should fit inside 15`s :D
6 point cage,Koni`s,lower front brace,rear brace,goodridge hoses,4,2,1,supersprint back box,k+n,kent gs2h,vernier,skimmed and ported head,alloy fuel tank.catch tank,Short shift ,9A soon.
Image
User avatar
Brunty
Posts: 244
Joined: Thu Apr 23, 2009 9:36 am
fill in the right answer: 10
Location: Castle Donington
Contact:

Re: Anyone here with Wilwood brakes fitted ?

Post by Brunty »

It'll depend on the offset of the wheel and the space behind the spokes. My 280s didn't fit behind TSW Hocks for instance.
Brunty

Image
Post Reply