Hi all, having issues with the my carb (Pierburg), think it may be the pull down unit. Its an 87 scala.
I have tried all the recomended methods of testing, but not come to a definite decision. I think removing it will allow me to check it over properly.
Can anyone tell me how to remove the unit, and then check it properly? Any help would be greatly appreciated!!
Removing Pull Down Unit
Forum rules
Hints, tips and guides for repair and modification - the FAQ section on the main website is worth checking first for information relating to common faults and technical help. Useful posts and guides will be added to the FAQ http://www.sciroccoregister.co.uk/scirocco-faq
Hints, tips and guides for repair and modification - the FAQ section on the main website is worth checking first for information relating to common faults and technical help. Useful posts and guides will be added to the FAQ http://www.sciroccoregister.co.uk/scirocco-faq
Re: Removing Pull Down Unit
Having now got hold of some vacuum tube (or in this case, random pieces of air line tubing) i've managed to check it using the suck on A, cover B etc method. And its fine. Which is annoying. So i have other issues, but that ones fine!
-
Nate
- Posts: 4045
- Joined: Thu Apr 02, 2009 10:37 pm
- fill in the right answer: 10
- Location: Cirencester / Swindon
Re: Removing Pull Down Unit
if you want the manual for the carb emailing to you, just pm your email address :)
