Bang on lock dropping off curbs?

Suspension; Gearbox, Clutch and Driveshafts; Brakes; Steering; Throttle and clutch cable issues
Forum rules
Hints, tips and guides for repair and modification - the FAQ section on the main website is worth checking first for information relating to common faults and technical help. Useful posts and guides will be added to the FAQ http://www.sciroccoregister.co.uk/scirocco-faq
scirocco_ne
Posts: 189
Joined: Wed Sep 19, 2018 11:00 pm
fill in the right answer: 15

Bang on lock dropping off curbs?

Post by scirocco_ne »

Hello everyone,

I thought i would ask this incase anyone has a clue. Since fitting new suspension on the car i have noticed it bangs when dropping off curbs under right lock with the left wheels up the curb. Other side seems fine but this side everytime under lock BANG.

It's all new sus wise so any ideas?

Thanks
Mick


hanna.melbo
Posts: 54
Joined: Mon Oct 05, 2015 9:14 pm
fill in the right answer: 15

Re: Bang on lock dropping off curbs?

Post by hanna.melbo »

Is it adjustable? sounds like it just bottoms out??? Can someone watch you drive off the curb to see what happens? in terms of weight distribution theres a lot of weight on the side thats on the road if one side is on the curb


User avatar
james butler
Posts: 2978
Joined: Fri Apr 24, 2009 1:54 pm
fill in the right answer: 10
Location: birmingham

Re: Bang on lock dropping off curbs?

Post by james butler »

loose bolt somewhere ie bottom ball joint, the shock strut to hub bolts, top mount bolts and securing nut on the very top of the strut.
if there is play you should be able to feel it if you jack the car up and wobble the wheel using a bar or something to apply pressure


I dont mind project cars but I HATE SANDING!!!
blakey
Posts: 135
Joined: Wed Oct 19, 2011 9:18 pm
fill in the right answer: 10
Location: Nottingham

Re: Bang on lock dropping off curbs?

Post by blakey »

Worth checking if the damper insert has any movement in the strut. People have put a washer or penny in the bottom and then tightened the collar to ensure the insert has no play in the strut.


'89 Sapphire Scala Inj.
Member No. 1455
scirocco_ne
Posts: 189
Joined: Wed Sep 19, 2018 11:00 pm
fill in the right answer: 15

Re: Bang on lock dropping off curbs?

Post by scirocco_ne »

Ill give it a good check over Thanks.

It is odd that its only one side and when a curb is bigger than usual.

It drives brilliant appart from this so i will have to get it sorted

Mick


scirocco_ne
Posts: 189
Joined: Wed Sep 19, 2018 11:00 pm
fill in the right answer: 15

Re: Bang on lock dropping off curbs?

Post by scirocco_ne »

Just had a look and everything was tight sadly.

I got some stilsons on the shocker insert and nipped it some more but to no avail.

I have noticed under no load there is up and down play though in the strut at the top nut. Should i try adding a extra washer to the piston shaft at the top to see if it helps?

Mick


blakey
Posts: 135
Joined: Wed Oct 19, 2011 9:18 pm
fill in the right answer: 10
Location: Nottingham

Re: Bang on lock dropping off curbs?

Post by blakey »

Sounds like it's worth adding a washer at the bottom under the damper insert of there's movement in the strut body.

Sent from my Moto Z2 Play using Tapatalk



'89 Sapphire Scala Inj.
Member No. 1455
scirocco_ne
Posts: 189
Joined: Wed Sep 19, 2018 11:00 pm
fill in the right answer: 15

Re: Bang on lock dropping off curbs?

Post by scirocco_ne »

blakey wrote: Sat Feb 23, 2019 6:37 pm Sounds like it's worth adding a washer at the bottom under the damper insert of there's movement in the strut body.

Sent from my Moto Z2 Play using Tapatalk

Would the top of the strut not also close the gap?


blakey
Posts: 135
Joined: Wed Oct 19, 2011 9:18 pm
fill in the right answer: 10
Location: Nottingham

Re: Bang on lock dropping off curbs?

Post by blakey »

It would, be careful the washer doesn't touch the seal around damper rod to avoid damage or leaks.

Sent from my Moto Z2 Play using Tapatalk



'89 Sapphire Scala Inj.
Member No. 1455
mark1gls
Posts: 3957
Joined: Thu Apr 02, 2009 9:28 pm
fill in the right answer: 10
Location: Somerset

Re: Bang on lock dropping off curbs?

Post by mark1gls »

If you lift the wheel off the floor and put a bar underneath the tyre then leaver on the bar you should see where the movement is, I find it’s usally the nut ontop of the strut mount, there is a think metal bush which is meant to be a crush bush when you tighten the nut but I find I can’t crush it, I remove the bush and grind a little off it. The car MUST be sat on its wheels and you undo the big nut, remove the big washer then with a couple of thin screw drivers you can remove the metal bush, grind a little off the height then re-grease then refit and test again once the car is back in the air...

You can see the metal bush which inserts into the top mount in this link...
https://www.ebay.co.uk/itm/PAIR-of-Febi ... 1097102012


Mk1 78 Scirocco GLS 1.6 FR, weekend toy.
Mk1 88 Golf GTi cabriolet 1.8 DX. Daily drive.
Membership No. 323
User avatar
james butler
Posts: 2978
Joined: Fri Apr 24, 2009 1:54 pm
fill in the right answer: 10
Location: birmingham

Re: Bang on lock dropping off curbs?

Post by james butler »

sounds like top mount bearing has a lot of play in it


I dont mind project cars but I HATE SANDING!!!
scirocco_ne
Posts: 189
Joined: Wed Sep 19, 2018 11:00 pm
fill in the right answer: 15

Re: Bang on lock dropping off curbs?

Post by scirocco_ne »

As soon as i get a chance i am going to have a good luck and diagnose it. Everything's new so either way something is either faulty or the washer gap is out as Mark suggested.


User avatar
Blueshark
Posts: 1215
Joined: Tue Apr 07, 2009 9:28 pm
fill in the right answer: 10
Location: Vleuten, The Netherlands

Re: Bang on lock dropping off curbs?

Post by Blueshark »

Never mind the problem.

Who drives his Scirocco of the curb ?. :-(

Joost


scirocco_ne
Posts: 189
Joined: Wed Sep 19, 2018 11:00 pm
fill in the right answer: 15

Re: Bang on lock dropping off curbs?

Post by scirocco_ne »

Blueshark wrote: Thu Feb 28, 2019 9:07 pm Never mind the problem.

Who drives his Scirocco of the curb ?. :-(

Joost
We are not talking group b style curb bouncing here haha

Any drop curb thats above a 2 inches and its BANG


scirocco_ne
Posts: 189
Joined: Wed Sep 19, 2018 11:00 pm
fill in the right answer: 15

Re: Bang on lock dropping off curbs?

Post by scirocco_ne »

mark1gls wrote: Sat Feb 23, 2019 8:18 pm If you lift the wheel off the floor and put a bar underneath the tyre then leaver on the bar you should see where the movement is, I find it’s usally the nut ontop of the strut mount, there is a think metal bush which is meant to be a crush bush when you tighten the nut but I find I can’t crush it, I remove the bush and grind a little off it. The car MUST be sat on its wheels and you undo the big nut, remove the big washer then with a couple of thin screw drivers you can remove the metal bush, grind a little off the height then re-grease then refit and test again once the car is back in the air...

You can see the metal bush which inserts into the top mount in this link...
https://www.ebay.co.uk/itm/PAIR-of-Febi ... 1097102012
Finally got round to filing the bushes down today until no play was present when jacked up.... It drives bettrr no doubt but on high curbs on a good lock still produces a bang?

Is it normal on curbs say 5-6" high for it to sound loud on drop off?

I checked all the new ball joints, bushes etc and nothing has play in it.

Thanks
Mick