Forum Update: This forum is now a legacy platform with limited activity. We recommend joining our Facebook group for the latest discussions and updates. The forum will remain online and usable but it's classed as an archive.

Users are NOT sync'd between the website and the forum. This means you MUST create an account for both.

Alignment and camber

Suspension; Gearbox, Clutch and Driveshafts; Brakes; Steering; Throttle and clutch cable issues
Forum rules
Hints, tips and guides for repair and modification - the FAQ section on the main website is worth checking first for information relating to common faults and technical help. Useful posts and guides will be added to the FAQ http://www.sciroccoregister.co.uk/scirocco-faq
Post Reply
the edmundator
Posts: 2928
Joined: Wed Apr 01, 2009 7:34 pm
fill in the right answer: 10
Location: BEDFORD
Contact:

Alignment and camber

Post by the edmundator »

How do I find somewhere that can sort out the alignment and camber on my suspension after it was lowered? I've got no idea what sort of place I'm looking for.

Anyone with a Birmingham-based recommendation, speak up.
Register Member 829
--
1980 (1976) Mk1 Junior Cup Replica
1987 MK2 GTX
mark1gls
Posts: 3957
Joined: Thu Apr 02, 2009 9:28 pm
fill in the right answer: 10
Location: Somerset

Re: Alignment and camber

Post by mark1gls »

Some tyre places can do it if they have the equipment and know how, many don't as they can't even set up the tracking properly !
My cousin works here, http://www.midlandvw.co.uk/home.html

I've not used them but I know he is a complete VW nut as are his work mates and I sure they will do a good job.

If you look in the gallery at the cars you can see his mk2 golf with 330bhp! (Aaron's mk2)
Mk1 78 Scirocco GLS 1.6 FR, weekend toy.
Mk1 88 Golf GTi cabriolet 1.8 DX. Daily drive.
Membership No. 323
User avatar
filmidget
Posts: 258
Joined: Fri Mar 06, 2009 12:16 pm
fill in the right answer: 10
Location: Nottingham

Re: Alignment and camber

Post by filmidget »

There is a good place up in Nottingam (Basford Alignment) if you you having a trip up to The Grotto or something...
'82 GTI 'CagedRoc' - MG Midget - Volvo 850 T5 - Citroen C2 GT - Lilac Trailer Custodian
Current owned:roadworthy factor = 75% (personal record)
the edmundator
Posts: 2928
Joined: Wed Apr 01, 2009 7:34 pm
fill in the right answer: 10
Location: BEDFORD
Contact:

Re: Alignment and camber

Post by the edmundator »

Thanks chaps.
Register Member 829
--
1980 (1976) Mk1 Junior Cup Replica
1987 MK2 GTX
User avatar
james butler
Posts: 3025
Joined: Fri Apr 24, 2009 1:54 pm
fill in the right answer: 10
Location: birmingham

Re: Alignment and camber

Post by james butler »

this is a pain in the ass to set up. i did mine using a plank of wood against the bottom of the wheel/floor with the other end on the plastic wing trim then measure the gap between the top of the wheel to the plank.
then change the shock and when put back together measure and adjust the gap at the top of the wheel against the plank.
this way the camber should be roughly the same as it was before you fiddled withit but it is a two man job.
the tracking will need to be done after but this can be done for 30 quid.
ile be honest ed the most garages will do is the tracking here in brum not many places do camber. the only place that would do the camber for me was vw at 200 quid.
this is how i did the camber on my rocko when i lowered it.
i can pop down n give you a hand if you like, just gimme a bell on the weekend or something.
james
I dont mind project cars but I HATE SANDING!!!
the edmundator
Posts: 2928
Joined: Wed Apr 01, 2009 7:34 pm
fill in the right answer: 10
Location: BEDFORD
Contact:

Re: Alignment and camber

Post by the edmundator »

Thanks, James. My comrades at the local MX5 club have recommended these guys in Dudley http://www.alineyourcar.co.uk/ and also a place called Chemix in Stourbridge and Halesowen. I'll give one of them a look as they're a bit closer to me.
Register Member 829
--
1980 (1976) Mk1 Junior Cup Replica
1987 MK2 GTX
Post Reply