1986 gt 1.6 restoration / rusy mess
Forum rules
Section for all vehicle and related projects. Please keep responses pertinent to thread.
Section for all vehicle and related projects. Please keep responses pertinent to thread.
1986 gt 1.6 restoration / rusy mess
So ive already got a thread on my 1991 j reg mk2 thats having a 20v turbo fitted- the bonnet came up so bought another car locally to rob the bonmet off etc.
I trailered the old girl back to work, guy said it hadmt hadn't moved for 5 years, brakes wernt stuck thankfully. She had no battery so connected jemper pack , checked oil n water amd give it ago but only spinning. So i grabs the easy start and it jumped imto into live for a seconds , i grabbed a fuel can and connected it to the fuel pipe directly, took a while for it to get into the carb etc but once lines were full it started right off the key. No water leaks which was a bonus. I trested treated her to £20 of fresh fuel and its champion. It gets pulled out of the garage every day as its a bus depot
I trailered the old girl back to work, guy said it hadmt hadn't moved for 5 years, brakes wernt stuck thankfully. She had no battery so connected jemper pack , checked oil n water amd give it ago but only spinning. So i grabs the easy start and it jumped imto into live for a seconds , i grabbed a fuel can and connected it to the fuel pipe directly, took a while for it to get into the carb etc but once lines were full it started right off the key. No water leaks which was a bonus. I trested treated her to £20 of fresh fuel and its champion. It gets pulled out of the garage every day as its a bus depot
Re: 1986 gt 1.6 restoration / rusy mess
First few jobs were oil n filters as oil was like sludge on the dipstick & and the tappets were really rattely
Re: 1986 gt 1.6 restoration / rusy mess
so summer is upon us and decided to see what lurks under the bodykit. I guess curiosity killed the car in a way ooops. Recently bought a door of a forum member off here so thank you its saving a rocco
Re: 1986 gt 1.6 restoration / rusy mess
Few snaps after removal of all the screws, they came out rather nice no rounded heads so thats what a scirocco lools like eith no body kit haha. So off with the wing, again rather pleased at how easy it comes to bits
Re: 1986 gt 1.6 restoration / rusy mess
Does the scirocco have a week spot in front of the rear wheels, the rust fairys have been and pinched some of mine
- james butler
- Posts: 2965
- Joined: Fri Apr 24, 2009 1:54 pm
- fill in the right answer: 10
- Location: birmingham
Re: 1986 gt 1.6 restoration / rusy mess
yeah there not a lot of protection there exept for wax and a carefull owner to clean there regularly.
looking through a lot of threads they commenly go there.
could be worse!!
looking through a lot of threads they commenly go there.
could be worse!!
I dont mind project cars but I HATE SANDING!!!
Re: 1986 gt 1.6 restoration / rusy mess
Oh dear is that both inner & outer sills thats been eaten by the rust fairys james
Re: 1986 gt 1.6 restoration / rusy mess
Not posted on here much but for those on the Facebook page will have seen the slow progress made that I will upload tonight
- james butler
- Posts: 2965
- Joined: Fri Apr 24, 2009 1:54 pm
- fill in the right answer: 10
- Location: birmingham
Re: 1986 gt 1.6 restoration / rusy mess
please do its getting too quiet on here of late and i for one love a good restoration thread full of pictures.
I dont mind project cars but I HATE SANDING!!!
Re: 1986 gt 1.6 restoration / rusy mess
Rust free wing fitted, panel gaps aren't the best but I'm a mechanic by trade not a panel beater or painter
-
- Posts: 630
- Joined: Wed Apr 15, 2009 11:01 am
Re: 1986 gt 1.6 restoration / rusy mess
little bit crusty, but not too bad really. are you going to paint the wing yourself?
Re: 1986 gt 1.6 restoration / rusy mess
Next up was the drivers side door which was fitted with air conditioning system.. aka a nice rusty hole where the handle was
For anybody wanting to swap locks is really easy, first off remove the chrome strip from the door handle by prying with a small flat blade screwdriver. That will reveal one screw the other is in the side of the door where it meets the striker pin. Gentely wiggle the handle free.
With the door handle now removed you will see the Y shaped part that moves when you open the handle, remove this and the lock barrel will come out the back.. stupid me never took any photos of that part though haha
For anybody wanting to swap locks is really easy, first off remove the chrome strip from the door handle by prying with a small flat blade screwdriver. That will reveal one screw the other is in the side of the door where it meets the striker pin. Gentely wiggle the handle free.
With the door handle now removed you will see the Y shaped part that moves when you open the handle, remove this and the lock barrel will come out the back.. stupid me never took any photos of that part though haha
Re: 1986 gt 1.6 restoration / rusy mess
A lad I work for does our repair work to our busses, does full panels etc, his finish off the gun is just as good as the standard bus paint job if you get me?steve bain wrote:little bit crusty, but not too bad really. are you going to paint the wing yourself?
So he's got the task when I find a bonnet
-
- Posts: 3954
- Joined: Thu Apr 02, 2009 9:28 pm
- fill in the right answer: 10
- Location: Somerset
Re: 1986 gt 1.6 restoration / rusy mess
Keep the updates coming on here as good to see.
I don't follow facebook as I try to avoid using it.
I don't follow facebook as I try to avoid using it.
Mk1 78 Scirocco GLS 1.6 FR, weekend toy.
Mk1 88 Golf GTi cabriolet 1.8 DX. Daily drive.
Membership No. 323
Mk1 88 Golf GTi cabriolet 1.8 DX. Daily drive.
Membership No. 323
Re: 1986 gt 1.6 restoration / rusy mess
The 20v project has come to a hault, as some expensive parts are now required etc. Thought I'd spend a little money on D511DEF as it's been sat neglected in the workshop with a pool of brake fluid under the rear wheels & a spongy brake pedal. So ive ordered a rear overhaul kit from herritage along with new rear bearings and a pair of front brake hoses & a new rocker gakset. I may drop the full beam and have it blasted... powder coating or black Hammerite?
Also fuel tank could do with replacing, 1986 carb tank is 55 litres? Slow progress but it's been off the road for 5 years so no rush
Also fuel tank could do with replacing, 1986 carb tank is 55 litres? Slow progress but it's been off the road for 5 years so no rush