The Roccie Horror Show
Forum rules
Section for all vehicle and related projects. Please keep responses pertinent to thread.
Section for all vehicle and related projects. Please keep responses pertinent to thread.
-
- Posts: 234
- Joined: Sun Aug 28, 2011 11:11 am
- fill in the right answer: 10
- Location: Northwich, Cheshire
Re: 16v MK2 Scirocco
Decided to go for a new steering wheel :)
Shell etc get delivered on Sunday:) then it's time to crack on with le build.
Shell etc get delivered on Sunday:) then it's time to crack on with le build.
-
- Posts: 400
- Joined: Wed Aug 14, 2013 1:04 pm
- fill in the right answer: 15
-
- Posts: 234
- Joined: Sun Aug 28, 2011 11:11 am
- fill in the right answer: 10
- Location: Northwich, Cheshire
Re: 16v MK2 Scirocco
Haha no chance :) best thing was I got it for free as it was just sat in the spare room at my brothers :)
Should look tidy I think.
Should look tidy I think.
Re: 16v MK2 Scirocco
Liking what your doing and keeping tabs on this thread.
If I ever get mine finished I'll be looking for a local "crowd" so will be in touch.
Me being in Crewe you're not far away.
If I ever get mine finished I'll be looking for a local "crowd" so will be in touch.
Me being in Crewe you're not far away.
Is that light at the end of the tunnel or a train coming the other way?
See my build thread here:- viewtopic.php?f=19&t=10466&start=75
See my build thread here:- viewtopic.php?f=19&t=10466&start=75
-
- Posts: 234
- Joined: Sun Aug 28, 2011 11:11 am
- fill in the right answer: 10
- Location: Northwich, Cheshire
Re: 16v MK2 Scirocco
Thanks Mate :)
We deffo need to get some kind of Rocco meet around here in summer. Have you got a build thread?
If you are after any parts then let me know as I am selling all of the below in the coming weeks (ideally I want to sell all together)
Shell (Minter with no rust, paint is really good but some lacquer peel on the drivers side from when the side strips were removed)
Doors (same as above)
Tailgate (same as above)
Bonnet (same as above, sounded proofing removed for some reason)
Suspension
wishbones
rear beam
hubs
I may also sell the seats which are also mint but that will only be if I can find the seats I want.
We deffo need to get some kind of Rocco meet around here in summer. Have you got a build thread?
If you are after any parts then let me know as I am selling all of the below in the coming weeks (ideally I want to sell all together)
Shell (Minter with no rust, paint is really good but some lacquer peel on the drivers side from when the side strips were removed)
Doors (same as above)
Tailgate (same as above)
Bonnet (same as above, sounded proofing removed for some reason)
Suspension
wishbones
rear beam
hubs
I may also sell the seats which are also mint but that will only be if I can find the seats I want.
Re: 16v MK2 Scirocco
Thanks for the offer but I've got pretty much everything I need.
I made the decision at the beginning to strip it out and make it a fast road/track car so I'm throwing away more than I'm buying. Seats, fuel lines, brakes, ignition, engine etc all being re-placed.
I've refurbed most of the suspension and steering which is now complete and am just finishing off my ABF re-build.
I'll be starting on the wiring, brake lines, ignition and fueling next.
Guess not restoring it to showroom or concourse is not too PC round here, but I loved my Scirocco since I bought it in 1999 and I want to make it a faster more fun car.
Build thread here:- viewtopic.php?f=19&t=10466&start=75
May be on the road next year, hopefully.
ATB
I made the decision at the beginning to strip it out and make it a fast road/track car so I'm throwing away more than I'm buying. Seats, fuel lines, brakes, ignition, engine etc all being re-placed.
I've refurbed most of the suspension and steering which is now complete and am just finishing off my ABF re-build.
I'll be starting on the wiring, brake lines, ignition and fueling next.
Guess not restoring it to showroom or concourse is not too PC round here, but I loved my Scirocco since I bought it in 1999 and I want to make it a faster more fun car.
Build thread here:- viewtopic.php?f=19&t=10466&start=75
May be on the road next year, hopefully.
ATB
Is that light at the end of the tunnel or a train coming the other way?
See my build thread here:- viewtopic.php?f=19&t=10466&start=75
See my build thread here:- viewtopic.php?f=19&t=10466&start=75
-
- Posts: 234
- Joined: Sun Aug 28, 2011 11:11 am
- fill in the right answer: 10
- Location: Northwich, Cheshire
Re: 16v MK2 Scirocco
Ahhhhh funny that as i was reading through your thread the other day :)
when I have mine up and running which should be soonish I will have to bob over your way and check out your handy work?
when I have mine up and running which should be soonish I will have to bob over your way and check out your handy work?
Re: 16v MK2 Scirocco
Be good that.
Is that light at the end of the tunnel or a train coming the other way?
See my build thread here:- viewtopic.php?f=19&t=10466&start=75
See my build thread here:- viewtopic.php?f=19&t=10466&start=75
-
- Posts: 234
- Joined: Sun Aug 28, 2011 11:11 am
- fill in the right answer: 10
- Location: Northwich, Cheshire
Re: 16v MK2 Scirocco
Soooo my other shell and bits were suppose to be arriving this weekend but we had some delays. Because of that i decided to get the wheels off the rocco and go and get my tyres transferred over. Well two transferred and two new ones fitted as the rear are too wide for my current tyres;
The joys of having friends that work in garages is having all of this done for free and learning how to fit stretched tyres :)
At the mo I have 195/45/15 on the front wheels which are 8J and 205/50/15 on the rears which are 9J. I think I may need to change the rears to 205/45/15 but I will make that decision after fitting them. It could look quite cool having fatter tyres on the rear OR it could look complete balls. I will post pics when they are on and you can decide for yourselves.
The joys of having friends that work in garages is having all of this done for free and learning how to fit stretched tyres :)
At the mo I have 195/45/15 on the front wheels which are 8J and 205/50/15 on the rears which are 9J. I think I may need to change the rears to 205/45/15 but I will make that decision after fitting them. It could look quite cool having fatter tyres on the rear OR it could look complete balls. I will post pics when they are on and you can decide for yourselves.
-
- Posts: 400
- Joined: Wed Aug 14, 2013 1:04 pm
- fill in the right answer: 15
-
- Posts: 234
- Joined: Sun Aug 28, 2011 11:11 am
- fill in the right answer: 10
- Location: Northwich, Cheshire
Re: 16v MK2 Scirocco
Not yet, waiting for the new shell to be delivered. Then I will have to fit them so it has something to sit on whilst I transfer everything over.
I will hopefully get a pic up early next week :)
I will hopefully get a pic up early next week :)
-
- Posts: 234
- Joined: Sun Aug 28, 2011 11:11 am
- fill in the right answer: 10
- Location: Northwich, Cheshire
Re: 16v MK2 Scirocco
Sooooo the new shell was delivered yesterday;
Mind the mess in the yard, currently having a new kitchen / bathroom fitted
Stainless fuel filler :)
Decided to do a test fit of the new wheels :)
So now it's time to start stripping Roccie and transferring everything over to the new shell which is now named............. Frankenstein
I shall look forward to keeping you all updated :)
Mind the mess in the yard, currently having a new kitchen / bathroom fitted
Stainless fuel filler :)
Decided to do a test fit of the new wheels :)
So now it's time to start stripping Roccie and transferring everything over to the new shell which is now named............. Frankenstein
I shall look forward to keeping you all updated :)
-
- Posts: 234
- Joined: Sun Aug 28, 2011 11:11 am
- fill in the right answer: 10
- Location: Northwich, Cheshire
Re: 16v MK2 Scirocco
Sooooo today I started removing the loom etc from Roccie. Hopefully have it all out and plumbed into Frankenstein by Monday.
-
- Posts: 234
- Joined: Sun Aug 28, 2011 11:11 am
- fill in the right answer: 10
- Location: Northwich, Cheshire
Re: 16v MK2 Scirocco
So this week I have got some days off so am getting stuck into the cars when I can.
Here is the progress so far;
Loom / dash and interior removed etc;
Started to plumb into the new shell
The misses didn't even say anything when she got home to a dining room full of interior
More updates later this week :) hopefully have the new rocco looking more like a car inside by Friday
Here is the progress so far;
Loom / dash and interior removed etc;
Started to plumb into the new shell
The misses didn't even say anything when she got home to a dining room full of interior
More updates later this week :) hopefully have the new rocco looking more like a car inside by Friday