Afternoon all.
My roll bars are quite heavily corroded / thinning under where the bushes were, so I'm in need of replacements.
Just wondering if anyone had fitted one of these uprated roll bars, and if so, are they any good?
https://www.ebay.co.uk/itm/152582832037
Uprated Anti Roll Bars?
-
daveyheats
- Posts: 93
- Joined: Sat Oct 24, 2020 6:35 pm
- fill in the right answer: 15
- Location: Stroud, Glos
Uprated Anti Roll Bars?
Last edited by daveyheats on Wed Feb 23, 2022 9:55 pm, edited 1 time in total.
-
GT_II
- Posts: 527
- Joined: Thu Feb 23, 2017 11:18 pm
- fill in the right answer: 15
- Location: Warwickshire
Re: Uprated Anti Roll Bars?
They are TUV approved, which gives some assurance of quality and safety. Technical details for the Scirocco MK1/2 version are available via the "Approval" button under Scirocco 53B here:
https://www.h-r.com/en/product-finder/#ausgabe
https://www.h-r.com/en/product-finder/#ausgabe
1992 VW Scirocco GT II 1.8 90PS Brilliant Black 30k
-
james butler
- Posts: 2966
- Joined: Fri Apr 24, 2009 1:54 pm
- fill in the right answer: 10
- Location: birmingham
Re: Uprated Anti Roll Bars?
upgrading anti roll bars make a huge difference along with a lower strut brace
however i would get a branded one and also change the clamps and fittings as they will be corroded too and liable to snap with the new forces applied by the thicker roll bars
however i would get a branded one and also change the clamps and fittings as they will be corroded too and liable to snap with the new forces applied by the thicker roll bars
I dont mind project cars but I HATE SANDING!!!