Which 15" Alloys and set up do you use?!

Standard and aftermarket Wheels and Tyres
Forum rules
Hints, tips and guides for repair and modification - the FAQ section on the main website is worth checking first for information relating to common faults and technical help. Useful posts and guides will be added to the FAQ http://www.sciroccoregister.co.uk/scirocco-faq
Post Reply
liam_0404
Posts: 104
Joined: Mon Mar 13, 2017 11:18 am
fill in the right answer: 15
Location: Hereford

Which 15" Alloys and set up do you use?!

Post by liam_0404 »

Liking the look of some 15's, probably not looking for much wider than 8j on the rear. Just wondering what people are running, tyre sizes, lows etc. Ronal Turbo's or Stuttgart are the sort I'm swaying towards, some pics would be nice too.
Thanks, Liam.


'88 Scirocco 1.6 8v GT
‘94 Golf 2.8 12v VR6
'02 Grand Cherokee Limited 4.0 I6
'07 Golf GTI 2.0T
GTXTRA
Posts: 3391
Joined: Mon Mar 02, 2009 9:38 pm
fill in the right answer: 10
Location: London

Re: Which 15" Alloys and set up do you use?!

Post by GTXTRA »

All of mine are on 15's other than the Scala - see the project threads.

From a personal point of view it's the best size re choice of wheel design to go for.

7 x 15 with an offset of 25 (some say can be twitchy) to 30 worth looking at.


Serial Rocco-ist.........
steve bain
Posts: 630
Joined: Wed Apr 15, 2009 11:01 am

Re: Which 15" Alloys and set up do you use?!

Post by steve bain »

7 x 15, et 25. 25mm spacers on the back with 175/45 tyres all round. coilover are all the way down, chopped bump stops and only about an inch of travel left over

and any excuse to post pics!!

Image

Image


Image

My build thread:
viewtopic.php?f=19&t=14083
steve bain
Posts: 630
Joined: Wed Apr 15, 2009 11:01 am

Re: Which 15" Alloys and set up do you use?!

Post by steve bain »

i should add i have cut the lips off all arches and had to trim the lip off the bodykit. I honestly have no idea how people drive them slammed and stanced. they must rub like a bitch!


Image

My build thread:
viewtopic.php?f=19&t=14083
Post Reply