INTERIOR GEAR LEVER BALL JOINT REPLACING mk2

Suspension; Gearbox, Clutch and Driveshafts; Brakes; Steering; Throttle and clutch cable issues
Forum rules
Hints, tips and guides for repair and modification - the FAQ section on the main website is worth checking first for information relating to common faults and technical help. Useful posts and guides will be added to the FAQ http://www.sciroccoregister.co.uk/scirocco-faq
Post Reply
EDDIE-F
Posts: 54
Joined: Sat May 05, 2018 9:18 pm
fill in the right answer: 15

INTERIOR GEAR LEVER BALL JOINT REPLACING mk2

Post by EDDIE-F »

I changed all the bushes and linkages under the car. But I held off doing the gear stick ball joint . Because I read a post on another site saying if you undo the ball joint housing inside the car something will fall off under the car! is this true? or can ( as it would appear by the haynes manual)I slide all the components off up the gearstick with any need to get under the car?
i only want to change the gearstick ball joint .


EDDIE-F
Posts: 54
Joined: Sat May 05, 2018 9:18 pm
fill in the right answer: 15

Re: INTERIOR GEAR LEVER BALL JOINT REPLACING mk2

Post by EDDIE-F »

Bit the bullet and went for it. Turns out its easy. All done from inside no drama. Though don't forget to put the big spring inside the ball.


mark1gls
Posts: 3954
Joined: Thu Apr 02, 2009 9:28 pm
fill in the right answer: 10
Location: Somerset

Re: INTERIOR GEAR LEVER BALL JOINT REPLACING mk2

Post by mark1gls »

Glad it went ok... might have a go at mine now as I’ve only ever changed the bushed around the gearbox end. ;-D


Mk1 78 Scirocco GLS 1.6 FR, weekend toy.
Mk1 88 Golf GTi cabriolet 1.8 DX. Daily drive.
Membership No. 323
G-Dub
Posts: 54
Joined: Sun May 20, 2012 6:06 pm
fill in the right answer: 15
Location: Peterborough

Re: INTERIOR GEAR LEVER BALL JOINT REPLACING mk2

Post by G-Dub »

Eddie
What brand gear lever ball joint did you use?

And did you have noticeable wear in your old one?


Post Reply