ok, thanks guys!

where can i get seal from? or will any rubber seal ring do?

the oil temp usually is around 60-75, never seen it go any higher than that.... :/

Ed

my rocco has been using water recently, i cant see any leaks or a change in oil and have been baffled... until today, on the way to work it was fine, then did the usual flashing red light on the ash and the temp shoots up, opened the bonnet and: http://i1027.photobucket.com/albums/y337/ehorsman ...

I guess this would go in this section!? Its been raining heavily recently... ive been driving in the rain too, i noticed tonight that the rear passenger floor and carpet was soaking wet... just this section, not on the drivers side or in the front anywhere, not even damp... anyone know where this ...

yer the drivers is higher up than the passengers... i set it as the haynes said, two clicks and tighten to just binding, then pull it up and they are locked... think its deffo more than 3 clicks... new cables for me then??

the passenger side went fine, all together and the drum slid on with ease, handbrake cable adjusted up nicely, the drivers side loosened, but is is still binding ever so slightly however much i slacken the cable... the wedges are both as far up as they can go... :/

yes i set the wedges right up... ill try slackening off the handbrake as you say! thanks!

Ed

hey, I had a leaking rear wheel cylinder and so i bought a new one and replaced it, i thought i may as well replace the brake shoes while i was at it, as they looked a bit thin and were covered in brake fluid... Ive done the drivers side, all back together, but when i went to put the drum on, it was ...

Loose boot slam catch! cheers captain!

Hi Guys and Girls... My bootlid has suddenly decided that it wont close propely... It wont shut unless it is slammed shut a couple of times, and when it finally does, it rattles, it locks and doesnt come opem but when im drivin it rattles and is very annoying... anyone had this problem or know whats ...

yes radius seat it is, i had a look at the studs that came with the wheels! nice one!

thanks chaps!

I'll get some got!

Ed

ahh ok cool! thanks!

is it the 60 degree ones that I need then?

Ed

Hi guys,

Just picked up some BBS RA wheels for my rocco!

anyone know where i can get some locking wheelnuts so they dont get robbed!? the chap ibought them from mentiond Mc Guard??

Ed

ahh ok, so the pair of wires that are there, the brown and green i connect to the front wires from my headunit and ignore the rear ones...?

any advice on the switched live?

thanks!

Ed

Hi guys and girls! ive got a pioneer head unit CD/MP3 jobby i have had for a while, it travels along with my cars! Ive been trying to wire it in today, however im very confused!! where would be the best place I can get a switched live from?? the haynes diagram makes no sense to me! after having mini ...

hmmm... i see... so there isnt really a cheap way... lol im not really after a drop that big o be honest.... what do you mean about machining down the dampers?

Ed