5 inches of snow on the rocco so won't be working on it in the only daylight hours I have this week A4hour window Saturday morning

Thanks chaps I will have a look at the leads situation on Saturday re testing the spark I did earth the lead
I will post any progress on Saturday

Any on got a picture of witch order the leads should be
Thanks Paul

Hi thanks I will check the leads ore on in the right order I will get a new rotor arm and try again
Thanks for you help
Paul

still wont start no spark checked rotor arm and dissy cap both new two weeks ago lots of dust in ther put old dissy cap back on still not fireing what next any ideas could it be a relay coil or other
thanks paul

Hi I have checked the fitting of the weber all vacuum pipes fitted correctly I have a new choke cable fitted
I have checked all fittings all semester fine after a hour of fiddling and it will. Still not start I checked the spark I do not seem to have a spark could it be some thing I have done or is ...

bengould wrote:If you send me a PM with your email address I can send you a copy of the whole fitting guide.

Ben

Hi Ben thanks for this I have got the fitting guide from you a few weeks ago I have followed it apart from one vacum pipe witch I will look at on Saturday morning
Thanks for you help

Paul

Thanks for the info I will have a go on Saturday morning as I am going to work when it's dark and not getting home until dark
Thanks paul

Would the vacuum pipes being wrong stop it from starting ?
As I can not think of any thing else
Thanks Paul

Nate wrote:is it a new or used carb? have you done anything to start setting it up? (idle and mixture)

It is second hand got it of here been on a rocco before I think I have the vacuum pipes wrong if any one can give me a picture of how they should be it would help
Thanks paul

Do you smell petrol on the plugs when trying to start the car? Is there petrol getting to the carb, I think you should see petrol squirt into the carb (when you have the air intake off) when you press the accelerator pedal even with out the car running.
Have you plumbed in the fuel in and return ...

Hi I fitted a weber yesterday and have spent all morning trying to start the car it did fire up once and died
Any ideas
What I have done so for removed the old peiearburgh disconnected all plugs put them to one side fitted the weber reconnected the water to the inlet manifold put the vacuum
pipe ...

ianaudia4 wrote:The part number you need is N 9009960, which should be 5mm.

Tar very much
Paul

Fitted my weber today apart from petrol house to short what diameter hose do I need
Thanks Paul

Or sell it to someone like me who only has the small fuel tanks and can't get a new one from VW.

I have a spare filler neck (for my own stock) which I think is the shorter version - I'd be happy to swap if you ended up with a longer one.
Ok thanks I will let you know it should be with me on ...