I have finally made my mind up and going for 14's... Good choice. :chill: I'll run 15" Compommotive CX400 in 7x15 ET0 and 8x15 Et -12 with 165 50/15; And 16" BBS RS 077 in 7x16 ET 18 and 7.5x16 ET 15 with 165 45 16; For now. The green rocco is already in the body shop and very soon wil be there ...

Hello Yes more uptades: Part's donor that i recently bought: http://i296.photobucket.com/albums/mm172/SamAlve/Fotografia0148-1.jpg http://sphotos-b.ak.fbcdn.net/hphotos-ak-snc7/738171_546561865354500_160045504_o.jpg VW Scirocco TS from 1976, as i said above for part's to my silver rocco. And ...

Cheers man :buddy: Early panels have an extra inch of metal on the bottom (duck bill) Mine has crash damage and is rusty inside. So as I needed to replace it I heald out for an early panel. It makes the front end lower to the ground ;) AHhh ok, many thanks for the info. Look at the new upgrade for ...

Nice upgrades,


Keep Going!!

PS: Sorry for the silly question, but why do you need an early front panel, it's any difference to the late front panel??

I thought they were the same, similar.

Cheers

Well an update: BBS RS 077: http://i296.photobucket.com/albums/mm172/SamAlve/Fotografia0143_zps81edce03.jpg http://i296.photobucket.com/albums/mm172/SamAlve/Fotografia0145_zps22cbb910.jpg http://i296.photobucket.com/albums/mm172/SamAlve/Fotografia0144_zps2019a18c.jpg http://i296.photobucket.com ...

So here are some updates: Sterring box from VW Golf MK1 GTI: http://i296.photobucket.com/albums/mm172/SamAlve/Fotografia0087.jpg Bumpers thanks to Winston: http://i296.photobucket.com/albums/mm172/SamAlve/SciRocco/Fotografia0090.jpg New Wheels that you already know, Compomotive TS 3-piece (9.5x16 ...

ET45 will make them tuck alot. the 5" barrels are needed for clearence on the inside of the arch and coilover. 0.5" dishes so it tucks like the trail fitted picture. :vcool: The interior of your fenders is like this: http://www.jiabano.com/cars/81rocco/108.jpg It's from an amrican rocco, if see ...

Winston wrote:0.5" lips and 5" barrels.. trust me ;)

Have you got a link to the irish build please?

And disches?? 0.5" or 1"??

Et45 in the front isn't too high for the rocco???

Its looks er.... different... :chortle: Don't go too narrow at the front mate, it'll be be like a soapbox racer! :pilot: Yes indeed. I will chase the bumpers up now. we are not having much luck are we! :dash: What coilovers are you planing on using? You should be ok lock wise. :good: you won't be ...

Thank you! Im going to knock the fronts down to 5.5" so it will still get some steering lock that low. The rears will be 8" with an offset of around ET26. im hoping the very edge of the dish will poke and the tyre will tuck. Have you got the bumpers yet? they have been in paris since the 18th. I ...

Very nice. Good updates. It's going to be super with those RS. So you are planning to use 6.5x15 front and 8x15 at rear?? Which offset's???Front and rear?? I'm planning to use my Compomotive's TS on 7.5x16 front and 8 or 8.5x16 on th rear. With offset's in about 20+. With negative camber. Looking ...

you cant redrill them, sell the wheels to me. :hugegrin: Yes they can be redrilled. The 5 PCD holes and centerbore is going to be welded/filled, and then re-open nem PCD holes and ceterbore: Here you can see the same work done to Lorinser RT wheels of a friend: http://i589.photobucket.com/albums ...

Cool... Mk1 Golf and Mk1/2 Scirocco gearboxes are pretty much the same, btw, although being a 1.1 litre, yours probably has an 084/085 gearbox rather than the 020 type you get on the bigger engines. You may well know that already, but just to be sure. Yes. Ah yes, I was miles away.. yes you would ...

Here are the wheels:

Compomotive TS 3 piece:



They are gonna to be redrilled to 4x100.

And probably i will have to buy new lip's.

Looking good dude Yes you can use your scirocco gearbox but you will need to use the mk1 clutch and flywheel to the AFT Thanks mate. I'm thinking in use a complete golf mk1 GTI gearbox, with clutch and flywheel of it to the AFT. As the golf mk1 gti gear selector/linkages. Nice project - hope it's ...