New steering knuckles for a 1.8t conversion

Suspension; Gearbox, Clutch and Driveshafts; Brakes; Steering; Throttle and clutch cable issues
Forum rules
Hints, tips and guides for repair and modification - the FAQ section on the main website is worth checking first for information relating to common faults and technical help. Useful posts and guides will be added to the FAQ http://www.sciroccoregister.co.uk/scirocco-faq
Post Reply
daveyheats
Posts: 93
Joined: Sat Oct 24, 2020 6:35 pm
fill in the right answer: 15
Location: Stroud, Glos

New steering knuckles for a 1.8t conversion

Post by daveyheats »

Hi all,
Looking for some help on buying some replacement steering knuckles for my MK2, as the ones that came with the car were toast.
The car is currently an empty shell going through restoration, but the plan is to get a 1.8t in there.

My question is, what steering knuckles do I need with this planned engine swap?

The only new ones I can seem to find online to buy are for the MK1, replacements for OE part numbers 171407256B, 171615311, 171498625D, 175407615 like these: https://www.ebay.co.uk/itm/175822058171

Will these be OK with a 1.8t going in?

Thanks for any help!

Image


Top
Village Idiots
Posts: 540
Joined: Wed Apr 08, 2009 9:33 am
fill in the right answer: 10
Location: Ribble Valley, Lancashire

Re: New steering knuckles for a 1.8t conversion

Post by Village Idiots »

These are the right ones for your car. All Mk1 and Mk2 Sciroccos were built on the same A1 floor plan, as used on Mk1 Golfs. Mk2 Golfs are quite different. It's when you come to drive shafts you need to make sure they are correct to mate up with the outputs on your gearbox. Sounds like an exciting future for the old girl!


Top
Post Reply

Return to “Running Gear”