Engine mount bushes

For all Carb and Injection engines, standard or modified plus non-standard engine transplants. Heads; Blocks; Cooling (including heater issues related to the cooling system); Mounts etc
Forum rules
Hints, tips and guides for repair and modification - the FAQ section on the main website is worth checking first for information relating to common faults and technical help. Useful posts and guides will be added to the FAQ http://www.sciroccoregister.co.uk/scirocco-faq
Post Reply
Mystery Mk2
Posts: 7
Joined: Wed May 10, 2017 10:18 am
fill in the right answer: 15

Engine mount bushes

Post by Mystery Mk2 »

Morning gents.
Wondering if one of you chaps had any measurement's for the orientation/position of the metalastick bushes into the housing.
Engine is a 1.8 EX
Engine removed many moons ago and photo's of orientation/position lost.
Many Thanks Neil.


User avatar
james butler
Posts: 2965
Joined: Fri Apr 24, 2009 1:54 pm
fill in the right answer: 10
Location: birmingham

Re: Engine mount bushes

Post by james butler »

the left and right engine rubber mounts are arrow shaped in their moulding and are supposes to point upwards if that makes sense.
the front and rear mounts are pretty self explanatory


I dont mind project cars but I HATE SANDING!!!
Mystery Mk2
Posts: 7
Joined: Wed May 10, 2017 10:18 am
fill in the right answer: 15

Re: Engine mount bushes

Post by Mystery Mk2 »

Thanks for that James.


Post Reply