When removing the studs from the cylinder head I broke one of the vacuum line points on the tube that goes from the master cylinder to the inlet manifold, anyone know what it's called, part number?! I broke the vacuum line that goes from it to the distributor. Could i just blank off and use a Y piece from the remaining one?
I've attached a photo of the unit.
(Anyone know of an app other than photobucket for uploading photos, it seems to be full of ads and a pain to use)
Liam.
I broke this, anyone know what it is?!
Forum rules
Hints, tips and guides for repair and modification - the FAQ section on the main website is worth checking first for information relating to common faults and technical help. Useful posts and guides will be added to the FAQ http://www.sciroccoregister.co.uk/scirocco-faq
Hints, tips and guides for repair and modification - the FAQ section on the main website is worth checking first for information relating to common faults and technical help. Useful posts and guides will be added to the FAQ http://www.sciroccoregister.co.uk/scirocco-faq
-
- Posts: 104
- Joined: Mon Mar 13, 2017 11:18 am
- fill in the right answer: 15
- Location: Hereford
I broke this, anyone know what it is?!
You do not have the required permissions to view the files attached to this post.
'88 Scirocco 1.6 8v GT
‘94 Golf 2.8 12v VR6
'02 Grand Cherokee Limited 4.0 I6
'07 Golf GTI 2.0T
‘94 Golf 2.8 12v VR6
'02 Grand Cherokee Limited 4.0 I6
'07 Golf GTI 2.0T
-
- Posts: 135
- Joined: Wed May 13, 2015 8:08 am
- fill in the right answer: 15
Re: I broke this, anyone know what it is?!
yes you can, its for the vacuum advance on the dizzy etc....