Boot Lock Seal Fitting

Bodyshell and Panels; Fittings; Dashboards; Interiors; Bumpers; Light clusters front and rear (non electrical queries) Grilles and brightwork; Repairs including to bulkhead due to clutch cable pulling through
Forum rules
Hints, tips and guides for repair and modification - the FAQ section on the main website is worth checking first for information relating to common faults and technical help. Useful posts and guides will be added to the FAQ http://www.sciroccoregister.co.uk/scirocco-faq
Post Reply
Mark H
Posts: 404
Joined: Sat Oct 11, 2014 8:55 am
fill in the right answer: 15
Location: Bolton

Boot Lock Seal Fitting

Post by Mark H »

Wondered if their was a guide to fittingthe boot lock seal, check the FAQ but no joy??

Mark


Mark

Alpine White
VW Scirocco GT2 (1991)
Membership Number 1296
User avatar
scrumpyone
Posts: 435
Joined: Wed Mar 23, 2011 1:32 pm
fill in the right answer: 10
Location: Castle Cary, Somerset

Re: Boot Lock Seal Fitting

Post by scrumpyone »



Dave

Register No:1110
'79 MK1 GLS (R.I.P.)
'91 MK2 GT2 (alive & kicking)
User avatar
Rocco2
Posts: 69
Joined: Tue Oct 04, 2016 5:31 am
fill in the right answer: 15
Location: Estonia

Re: Boot Lock Seal Fitting

Post by Rocco2 »

I used help of a heat gun to warm up the new seal, so its nice and stretchy. Popped into position like a charm :)
It is always easier to install rubber and plastic things when they are warmed up before, specially putting old stuff back.


Rocco goes turbo
Mark H
Posts: 404
Joined: Sat Oct 11, 2014 8:55 am
fill in the right answer: 15
Location: Bolton

Re: Boot Lock Seal Fitting

Post by Mark H »

All done, thanks for the input guys


Mark

Alpine White
VW Scirocco GT2 (1991)
Membership Number 1296
Post Reply