16v 4 branch question

Carbs; K-jet; Tanks; Lines; Filler necks, Senders; aftermarket fuel systems; Exhausts and Manifolds;air filters - standard and aftermarket
Forum rules
Hints, tips and guides for repair and modification - the FAQ section on the main website is worth checking first for information relating to common faults and technical help. Useful posts and guides will be added to the FAQ http://www.sciroccoregister.co.uk/scirocco-faq
Post Reply
RoccoGuy
Posts: 105
Joined: Sat Apr 04, 2009 10:25 pm
fill in the right answer: 10
Location: Nuneaton

16v 4 branch question

Post by RoccoGuy »

i've been offered a mk1 golf 16v 4 branch but its for a 2ltr 16v, would this fit? i've heard that the 2ltr is taller than the 1.8 kr?


Image
monzajake
Posts: 744
Joined: Thu Mar 05, 2009 7:13 pm
fill in the right answer: 15
Location: surrey

Re: 16v 4 branch question

Post by monzajake »

yeap will fit


Image
duggers
Posts: 162
Joined: Fri Apr 10, 2009 5:54 pm
fill in the right answer: 10
Location: Milton Keynes

Re: 16v 4 branch question

Post by duggers »

The ABF 2l is taller by about 15mm but the 9a and other Audi variants are the same block ( referred to as bubble block iirc) as KR which is same as DX etc so it should be ok as these are/were the more common upgrades.


Apparently the dreadful paint on my Rocco is PATINA....
Membership # 432
Post Reply