Suspension; Gearbox, Clutch and Driveshafts; Brakes; Steering; Throttle and clutch cable issues
Hints, tips and guides for repair and modification - the FAQ section on the main website is worth checking first for information relating to common faults and technical help. Useful posts and guides will be added to the FAQ http://www.sciroccoregister.co.uk/scirocco-faq
The pictures in this thread have disappeared thanks to photobucket, but if you google Scirocco South Africa Clutch Kit Bulkhead and look at the images, the pictures of the gold engine bay are the ones you need.
i had to drill one new hole so i suppose your right the other existing hole could be for your vac pipe the connecting rod between the kit mech and the pedal i found to be too short so i made my own. i also needed to drill the original hole round other than that it was a doddle
once i could see where it was going to go i beefed up both sides with 2 mm plate and bored the original clutch hole round with a cone drill. its pretty sturdy now. you can also see in the bottom picture just how close the bar linkage is to the bulkhead which is why i made the longer one