Rear wishbone captive bolt sheered.

Suspension; Gearbox, Clutch and Driveshafts; Brakes; Steering; Throttle and clutch cable issues
Forum rules
Hints, tips and guides for repair and modification - the FAQ section on the main website is worth checking first for information relating to common faults and technical help. Useful posts and guides will be added to the FAQ http://www.sciroccoregister.co.uk/scirocco-faq
Post Reply
bora
Posts: 6
Joined: Sat Dec 10, 2016 3:27 am
fill in the right answer: 15

Rear wishbone captive bolt sheered.

Post by bora »

Just took off the wishbones and one of the captive bolts that holds the rear bush in place has sheered, haven't rolled back the carpet yet (bit pissed off) but I was wondering if it is easily accessed or well hidden.


User avatar
james butler
Posts: 2965
Joined: Fri Apr 24, 2009 1:54 pm
fill in the right answer: 10
Location: birmingham

Re: Rear wishbone captive bolt sheered.

Post by james butler »

could you drill it out and thread a bolt in instead?
turn the captive bolt into a captive nut


I dont mind project cars but I HATE SANDING!!!
bora
Posts: 6
Joined: Sat Dec 10, 2016 3:27 am
fill in the right answer: 15

Re: Rear wishbone captive bolt sheered.

Post by bora »

Good thinking, yes if there is enough metal inside there it's a good possibility and it would save lifting the carpets. Cheers for that mate.


User avatar
unknownmale
Posts: 991
Joined: Tue Jul 23, 2013 2:34 pm
fill in the right answer: 15
Location: London

Re: Rear wishbone captive bolt sheered.

Post by unknownmale »

You could drill it out and use a rivnut (Nut inserts). not sure if they are strong enough for that application though.

Or threaded rod and weld it, or like James said


- David
User avatar
essextom
Posts: 991
Joined: Sat Feb 18, 2012 6:27 pm
fill in the right answer: 10
Location: Chelmsford

Re: Rear wishbone captive bolt sheered.

Post by essextom »

im pretty sure if you remove the rear lower seat and the foam side bit u can see the top of the captive bolt. I would drill it out and then fit a high tensile bolt get a friend to hold the top while you torque from the bottom or tack weld it in place. Rivnuts would not be strong enough, neither would tapping, in my opinion.


mark1gls
Posts: 3954
Joined: Thu Apr 02, 2009 9:28 pm
fill in the right answer: 10
Location: Somerset

Re: Rear wishbone captive bolt sheered.

Post by mark1gls »

essextom wrote:im pretty sure if you remove the rear lower seat and the foam side bit u can see the top of the captive bolt. I would drill it out and then fit a high tensile bolt get a friend to hold the top while you torque from the bottom or tack weld it in place. Rivnuts would not be strong enough, neither would tapping, in my opinion.

Its the bolt at the front of the car, holding the back of the front wish bone and front anti roll bar (if you have one) to the car, not the rear beam to the car.


Mk1 78 Scirocco GLS 1.6 FR, weekend toy.
Mk1 88 Golf GTi cabriolet 1.8 DX. Daily drive.
Membership No. 323
User avatar
essextom
Posts: 991
Joined: Sat Feb 18, 2012 6:27 pm
fill in the right answer: 10
Location: Chelmsford

Re: Rear wishbone captive bolt sheered.

Post by essextom »

Agh Mis read. I'd still say that tapping or rivnut is iffy.


User avatar
unknownmale
Posts: 991
Joined: Tue Jul 23, 2013 2:34 pm
fill in the right answer: 15
Location: London

Re: Rear wishbone captive bolt sheered.

Post by unknownmale »

Yeah, definitely don't try and tap it, I think you'd only end up with 2 threads. But don't think anyone's suggesting that.

Personally i'd drill it out and weld a bolt in from the top.


- David
bora
Posts: 6
Joined: Sat Dec 10, 2016 3:27 am
fill in the right answer: 15

Re: Rear wishbone captive bolt sheered.

Post by bora »

Thanks James, drilled and tapped it, the thickness of the steel I tapped into is about 12mm thick the nut that originally held it on is about 8mm thick so class that as job done. Thanks all for your input.


mark1gls
Posts: 3954
Joined: Thu Apr 02, 2009 9:28 pm
fill in the right answer: 10
Location: Somerset

Re: Rear wishbone captive bolt sheered.

Post by mark1gls »

Good to hear you have sorted it, smear a little copper grease over the thread to stop it rusting in years to come.


Mk1 78 Scirocco GLS 1.6 FR, weekend toy.
Mk1 88 Golf GTi cabriolet 1.8 DX. Daily drive.
Membership No. 323
bora
Posts: 6
Joined: Sat Dec 10, 2016 3:27 am
fill in the right answer: 15

Re: Rear wishbone captive bolt sheered.

Post by bora »

You are talking to the converted here, I smear copper grease over any nut and bolt I remove, saves a lot of work in the future.


Post Reply