Spotted by my girlfriend in Ealing, West London, this evening, a white MK2, she didn't get the reg or model (still in training!!!).

What was wrong with the last GT Ben, looked okay when I saw it last at Biggar?

The injection cars have a 525mm radiator, hence why your EX shroud doesn't fit!
Put a wanted ad on here in the appropriate section, somebody will have one.

A picture of a correctly fitted clutch cable:

You haven't stated what model of Scirocco? Also what end has the cable snapped? What cables have you been fitting?
Where are you based?

The handbrake warning light also acts as a warning light for low brake fluid so best check that first! If not low fluid, does the light go out when you depress the switch under the handbrake with your finger? If so then it could be the handbrake lever is slipping off the switch when you are driving,...

I've got one of those sitting in my garage, unused. Agree that's taking the water, but's what a realistic price? btw - I have another one that I bought from the USA (again new and unused), this one is metal and has 'Shadow' as an emblem in the corner. I also have a Trailblazer perspex rear name pan...

An absolute outrageous price for what is a cheap copy of a quality Kamei item!

Top work Glen.

Go down to your local VW dealer and grab 5 litres of Synta Silver and a genuine oil filter and sump washer, should cost less than £25 all in!

I would post you a picture but Photobucket is being a feckin pain in the harris!
Have you a picture of yours? If so I could take a look and see if there is anything obvious.

Contact your local VW dealer and ask them for compatible part numbers.

Pretty certain that some cars with the 1.8 EX engine had Bosch dizzys fitted as well, these may be easier to find! You could speak with your local friendly VW dealer and ask them for part numbers that are compatible.

Take a look at the existing illumination cable, it is grey and blue and not very thick as the OEM bulbs are only 1.2w.
I would recommend soldering and covering with heatshrink!

Last time I did this (at a show for someone else!), I used a 15mm socket as a guide, with mazellan holding it whilst I tighten the nut up from underneath, worked at treat afterwards.