Anyone know if a 9a 16v loom and ecu from a passat b3 will work on a kr k-jet set up ? No knock sensors used just a tps sensor and wur cs valve woundered if it would create a spark etc etc Found one in my stash so was wondering all day why i kept it [emoji38] Tia [emoji106] Sent from my SM-G965F usi...

Good to hear about this one again.

Cool.
Clocked it under cover other day and said to be better half your back ! Hope all is well.

Mines going fine. She is now a proper garage queen undercover and clean.. Not much use tbh.. lol..
Must all get together for a Christmas meet and swift one.

50 quid for the shell.. ie no running gear.
just so i can sit it in the garage.......

Yes, I did think about doing the car transporter. I've also thought about hiring a van, which my belongings can go into and then a trailer on the back possibly as well. Just a heads up. Check your driving licence to make sure you can tow. 94 95 the law changed with the licence and some things where...

Is the ecu wired up to the coil correctly ?
Done the same conversion 10+ years ago.
Think without looking 2 black wires to coil 1 green and 1 black to - on battery.
double check the wires on the dizzy loom can get abit loose. Where you based btw ?

abf 150 ish bhp G60 160 ish bhp Both in standard specs from what i remember. G60 costs loads more in the long run but nice engine. A the howl of a charger is nice. Personally looked at both routes a few years back. Ended up with abf on k-jet which suits me to a tee and give the retro look for the ca...

210mm set up.

Good luck and congratulations on the job. Hope to catch uo soon. All the best.

well well well. how are fella ?
I have a blue one which no longer fits ! It now sports itself on the huge teddy bear belonging to my daughter !

If using k-jet. Simply half the lower half of the air box.
If running the abf set up a cone filter kit is your friend. This will have a the right gubbins for the air sensor etc..

The number on the flaps (butterflies) is the bore of the throttle body.
I assume the numbers on this on are greater than the standard one on your DX ?
when you fit it to the inlet open up the butterflies and your see a ridge around the bore holes , as manifold is to small. This needs to be flied out.

Think i used an Audi 80 5 cylinder one many year's back. The inlet needs to be filed to suit throttle body. Some 16v throttle bodys do have the vacume pipe on the rear again there a audi item, early type 90s

Anyone know the length of a mk1 with no bumpers on or with bumpers on ? Need to know for new storage space and don't have the time to drive 6 miles out of my way to measure up. Feet measurement would be great.
Thanks

Gunsons easibleed always works fine for me.
I've got one if you want to borrow it luke. Call me if you want to use it matey